Unit of competency Outline

Date retreived
23/07/2026 4:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Drape fabrics to make patterns

Drape fabrics to make patterns

Unit of competency
National Code
MSTFD4021
State Code
BAW74
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
100505 - Fashion Design
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge to drape fabrics to make patterns.This unit of competency applies to using draping techniques to create a basic fitted foundation. This applies to the creation of fitted blocks, such as a bodice and a skirt and does not include draping of set-in sleeves. Draping is conducted on a body form, such as a mannequin or model.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to drape fabrics
  • 2.1 Select and prepare draping tools and equipment
  • 2.2 Prepare body form for draping
  • 2.3 Identify and mark reference points on body form and make any other necessary preparations
  • 2.4 Select and prepare fabric for draping
  • 2.5 Prepare the drape plan
3 Transfer drape to make pattern
  • 3.1 Pin fabric on model form and perform draping operations
  • 3.2 Remove drape from model form and draw or rule lines on drape at pin positions
  • 3.3 Use drape as a template to create paper pattern or block
  • 3.4 True and mark pattern
4 Check and finalise pattern
  • 4.1 Check pattern pieces for all requirements, label pieces and complete markings
  • 4.2 Finalise pattern and check it is accurate, complete and complies with design specifications
  • 4.3 Complete pattern specification sheet, attach to patterns for storage and file appropriately
No information
No information
Replaces
State Code National Code Title Type
W7240 LMTFD4021B Drape fabrics to make patterns Unit of competency
Replaced By
State Code National Code Title Type
OEZ12 MSTAT4011 Drape fabrics to make patterns Unit of competency