Unit of competency Outline

Date retreived
22/07/2026 9:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean vehicle glass surfaces

Clean vehicle glass surfaces

Unit of competency
National Code
AURVTG007
State Code
AXA02
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
039909 - Cleaning
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to prepare and clean vehicles’ internal and external glass surfaces to remove visible dirt and grime. It involves preparing for the task, selecting and using cleaning products, cleaning glass surfaces to workplace standards, and completing workplace processes and documentation.It applies to those working in the automotive detailing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for glass cleaning
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Glass cleaning materials and equipment are selected and prepared according to manufacturer instructions and workplace procedures
  • 1.3 Safety data sheets (SDS) for glass cleaning fluids and materials are sourced and interpreted
  • 1.4 Vehicle is inspected to ensure there is no prior damage
  • 1.5 Work is planned to minimise waste and use time efficiently
  • 1.6 Work area is prepared to allow cleaning activities to take place according to workplace procedures
  • 1.7 Hazards associated with the work are identified and risks are managed
  • 1.8 Vehicle is protected and safely located according to workplace procedures
2. Carry out glass cleaning activities
  • 2.1 Glass cleaning procedures are carried out using approved materials, methods and equipment according to workplace procedures and safety and environmental requirements
  • 2.2 Glass cleaning fluids are applied without causing damage to vehicle or components
  • 2.3 Glass cleaning fluids are removed using lint-free cloths or paper towelling
  • 2.4 Glass surfaces are finished according to workplace procedures and quality standards
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectation and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF476 AURVTG2007 Clean glass surfaces Unit of competency