Unit of competency Outline
Date retreived
23/07/2026 1:01 AM AWST
23/07/2026 1:01 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Sew leather by machine
Sew leather by machine
Unit of competency
National Code
LMTLG2002A
LMTLG2002A
State Code
W7381
W7381
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/10/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
17/10/2014
Nominal Hours
80
Description
This unit covers the skills and knowledge required to machine sew leather pieces.
Notes
Elements and Performance Criteria
1 Prepare work pieces
- 1.1 Work bundle is received, checked and any follow up action assessed in accordance with workplace procedures including quality checks
- 1.2 Quality of received component parts is assessed
- 1.3 Work pieces are laid out in correct sequence in accordance with specifications
2 Prepare workstation
- 2.1 Workbench and seating are set up to achieve operator comfort and to minimise fatigue
- 2.2 Machines are cleaned and checked in accordance with workplace procedures and OHS practices
- 2.3 Records are kept
3 Set up machine
- 3.1 Machine is set up and adjusted in accordance with manufacturers' instructions, workplace requirements and specifications for the work
- 3.2 Threads are selected according to specifications
- 3.3 Needle types, attachments and parts are checked and worn needles and parts are changed as necessary
- 3.4 Stitch length is set and tested against specifications
- 3.5 Tension is set according to specifications
- 3.6 Machine is tested for correct operations
4 Perform machine sewing
- 4.1 Pieces are selected according to size, colour and style
- 4.2 Materials are accurately positioned to achieve required specifications, including quality and to minimise stretch
- 4.3 Seams are machined to achieve specifies results
- 4.4 Threads are trimmed as required
5 Identify poor machine performance
- 5.1 The performance of the machine is regularly checked for signs of faulty operations and action taken
6 Conduct final quality check for operations
- 6.1 Final product is checked to ensure workplace quality requirements are met
- 6.2 Production faults are dealt with
7 Despatch completed work
- 7.1 Component parts are bundled, stacked, stored or despatched
- 7.2 Production faults are recorded as required
- 7.3 Records are completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines may include
a range from plain machines to computerised stitching machines
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Materials may include
leather
vinyl
pigskin
suede
cotton
other materials
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines may include
a range from plain machines to computerised stitching machines
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Materials may include
leather
vinyl
pigskin
suede
cotton
other materials
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work prior to commencing operations
apply machining techniques over a range of operations
operate at least one type of machine where positioning of the work may be controlled by machine guides or work markers
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work prior to commencing operations
apply machining techniques over a range of operations
operate at least one type of machine where positioning of the work may be controlled by machine guides or work markers
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXP88 | LMTPRLG04AA | Sew leather by machine - 1 | Unit of competency |
| AXP89 | LMTPRLG04BA | Sew leather by machine - 2 | Unit of competency |
| AXP90 | LMTPRLG04CA | Sew leather by machine - 3 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV37 | MSTLG2002 | Sew leather by machine | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W375 | LMT30907 | Certificate III in Leather Production | Qualification |
| W363 | LMT21207 | Certificate II in Leather Production | Qualification |