Unit of competency Outline

Date retreived
22/07/2026 1:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and adjust bicycles to fit riders

Select and adjust bicycles to fit riders

Unit of competency
National Code
AURBCA002
State Code
AXE57
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
5
Description
This unit describes the performance outcomes required to select and adjust a bicycle to suit its rider. It involves gathering rider information and matching the bicycle to the rider’s ability and cycling requirements, adjusting the bicycle to fit, and completing workplace processes and documentation.It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to adjust bicycle
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Customer cycling requirements and preferences are identified and confirmed
  • 1.3 Physical attributes of customer are assessed through discussion, observation and if appropriate measurements
  • 1.4 Suitable bicycle types and configurations are identified to match customer requirements
  • 1.5 Features and benefits of selected bicycle are discussed with customer
2. Adjust bicycle to fit the rider
  • 2.1 Workplace procedures, manufacturer specifications, and safety and environmental requirements are sourced and interpreted
  • 2.2 Hazards associated with the work are identified and risks are managed
  • 2.3 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 2.4 Bicycle components are adjusted to match rider’s attributes and requirements using specialist tools and equipment and according to workplace procedures.
  • 2.5 Customer test ride of bicycle is observed to confirm riding comfort and efficiency, and further adjustments are made as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF039 AURBCA2002 Select and adjust bicycle to fit rider Unit of competency
Replaced By
State Code National Code Title Type
OCI93 AURBCA102 Select and adjust bicycles to fit riders Unit of competency