Unit of competency Outline

Date retreived
23/07/2026 6:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct routine service of security equipment and systems

Conduct routine service of security equipment and systems

Unit of competency
National Code
CPPSEC3041
State Code
OBI92
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
029901 - Security Science
Original Release Date
20/05/2020
Nominal Hours
20
Description
This unit specifies the skills and knowledge required to conduct routine servicing to maintain a range of security equipment and systems. It includes identifying damage, obstructions or component wear, diagnosing common faults and making appropriate adjustments to ensure the correct operation of security equipment and systems. This work applies in extra low voltage environments as defined in Australian Standard AS/NZS2201.1:2007 Intruder alarm systems - Client’s premises - Design, installation, commissioning and maintenance (AS/NZS 2201).A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Prepare to service security equipment and systems.
  • 1.1 Review work instructions to confirm client and site requirements and routine service timeframes.
  • 1.2 Review AS/NZS 2201 to understand regulatory requirements associated with servicing security equipment and systems and apply to work instructions.
  • 1.3 Confirm type of security equipment and system to be serviced in consultation with relevant persons.
  • 1.4 Review and follow workplace policies and procedures including work health and safety (WHS) when carrying out work tasks.
2 Plan and organise work tasks.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required materials, tools and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Arrange access to security equipment and system in consultation with relevant persons.
  • 2.4 Identify hazards in the work area and apply risk control measures.
3 Carry out routine service procedures on security equipment and system.
  • 3.1 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
  • 3.2 Access security equipment and system requiring servicing with minimal disruption to services and others in the work area.
  • 3.3 Inspect and check security equipment and system to identify damage, obstruction or component wear.
  • 3.4 Perform routine service procedures on security equipment and system following manufacturers’ instructions.
  • 3.5 Conduct permitted repairs to ensure correct operation of security equipment and system following manufacturers’ instructions.
  • 3.6 Identify complex fault or repair requirements and report to relevant persons for specialist attention.
4 Finalise routine service and complete documentation.
  • 4.1 Reinstate security equipment and system and confirm correct operation and connections.
  • 4.2 Notify completion of work to relevant persons.
  • 4.3 Complete routine service documentation detailing service procedures, repairs undertaken and identified faults according to workplace and regulatory requirements.
  • 4.4 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.5 Restore work area to original condition and remove waste caused by routine service tasks.
No information
No information
Replaces
State Code National Code Title Type
D1442 CPPSEC3041A Maintain and service security equipment and system Unit of competency