Unit of competency Outline

Date retreived
22/07/2026 5:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble copper foil glass components

Assemble copper foil glass components

Unit of competency
National Code
MSFSL3006
State Code
AWS58
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/03/2016
View on TGA
State Implementation and Classification
Approved Date
20/05/2016
Field of Education
040323 - Glazing
Original Release Date
20/05/2016
Nominal Hours
100
Description
This unit specifies the skills and knowledge required to assemble copper foil components using a range of fixing and joining components.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, designs, job sheets or work instructions
2 Plan and prepare for work
  • 2.1 Carry out service on selected tools and equipment, including identifying/rectifying or reporting any faults prior to commencement
  • 2.2 Identify and obtain materials appropriate to the work application ensuring they are prepared, safely handled and located ready for use
  • 2.3 Identify and apply environmental workplace considerations and measures to reduce noise, dust and obstacles
  • 2.4 Plan assembly sequence
  • 2.5 Select fixing and joining devices in accordance with types of materials to be joined and work instructions
  • 2.6 Select and check jigs for suitability of purpose
3 Assemble components
  • 3.1 Lay out and assemble components using jigs and appropriate fastenings
  • 3.2 Use hand and power tools as required
  • 3.3 Check assembled work for compliance with specifications
  • 3.4 Prepare, assemble and fit components in accordance with specifications
  • 3.5 Repair or tag work which does not meet quality specifications for further processing or recycling/disposal
  • 3.6 Organise and store finished products in holding area
4 Check work area and maintain equipment
  • 4.1 Tag and report faulty and/or defective equipment in accordance with workplace procedures
  • 4.2 Remove waste and scrap material for disposal and/or recycling as required
  • 4.3 Clean, check and maintain tools and equipment in accordance with manufacturers’ recommendations and SOPs
  • 4.4 Maintain work area in accordance with SOPs
No information
No information
Replaced By
State Code National Code Title Type
OAK00 MSFDG3004 Assemble copper foil glass components Unit of competency
State Code National Code Title Type
J732 MSF30413 Certificate III in Glass and Glazing Qualification