Unit of competency Outline

Date retreived
22/07/2026 11:04 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce double-faced web

Produce double-faced web

Unit of competency
National Code
ICPCBF3070
State Code
OBP48
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to operate, adjust, monitor and shut down equipment and machinery used to produce double-faced web for corrugated board manufacture.It applies to individuals who perform tasks such as monitoring machinery operations, dealing with routine problems and reporting production and machinery faults.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and adjust quality
  • 1.1 Organise inspection and/or testing of sample
  • 1.2 Inspect and test sample as required according to enterprise procedures
  • 1.3 Interpret results and make adjustments according to product and machine specifications as required
2. Maintain operation of reel transportation system and double facing process
  • 2.1 Monitor and adjust reel stand and web control system according to work health and safety (WHS) requirements
  • 2.2 Add substrate to the process according to job specifications
  • 2.3 Monitor and adjust starch and heat delivery systems
3. Maintain in-line process(es)
  • 3.1 Check and adjust coating and waxing units
  • 3.2 Observe and adjust tape dispensing units
  • 3.3 Monitor and adjust slitters and cut-off knife
4. Maintain production process
  • 4.1 Use machine controls as required
  • 4.2 Review and verify performance using the process control system
  • 4.3 Monitor and adjust starch performance throughout production run
  • 4.4 Conduct quality checks on a regular basis and adjust as required
  • 4.5 Report process adjustments to eliminate problems according to enterprise procedures
5. Identify and rectify problems
  • 5.1 Identify and report problems in machine operation according to enterprise procedures
  • 5.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 5.3 Verify repairs and adjustments as required prior to resumption of operations
6. Conduct shutdown of production process
  • 6.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 6.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 6.3 Clean and disengage all required parts of machinery used in printing process
  • 6.4 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUM80 ICPCBF307 Produce double-faced web Unit of competency