Unit of competency Outline

Date retreived
22/07/2026 11:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect, repair and refit motorcycle tyres and tubes

Remove, inspect, repair and refit motorcycle tyres and tubes

Unit of competency
National Code
AURJTJ002
State Code
AXC95
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
35
Description
This unit describes the performance outcomes required to remove tyres and tubes from motorcycle wheels, inspect the tyre and wheel to assess serviceability, carry out tyre and tube repairs, and reassemble the wheel assembly. It involves identifying and confirming work requirements, preparing for the work, inspecting, repairing and refitting motorcycle tyres and tubes, and completing workplace processes and documentation. It applies to those working in the motorcycle service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, repair and refit motorcycle tyres and tubes
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect tyres, tubes and wheels
  • 2.1 Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.2 Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures
  • 2.3 Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
3. Repair and refit tyres and tubes
  • 3.1 Repair options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Tyres and tubes are repaired according to manufacturer specifications and workplace procedures
  • 3.3 Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
  • 3.4 Assembled wheel and tyre are checked for serviceability and correct assembly, and wheel assembly is inflated according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information