Unit of competency Outline

Date retreived
22/07/2026 9:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lift loads mechanically

Lift loads mechanically

Unit of competency
National Code
ICPSUP235
State Code
AUN18
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to safely use basic lifting equipment such as slings, ropes, shackles, eye bolts and spreader beams.It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry, using limited practical skills and fundamental knowledge in a defined context. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Attach lifting gear to loads
  • 1.1 All work is undertaken safely and to prescribed procedures
  • 1.2 Load is inspected and best lifting method determined for weight and shape
  • 1.3 Appropriate load shifting equipment is selected
  • 1.4 Lifting gear is inspected and damaged or worn items are labelled and rejected
  • 1.5 Where appropriate, safe working loads are calculated to Australian Standards
  • 1.6 Lifting gear is attached to load in an appropriate and safe manner, and to specifications where required
2. Move loads
  • 2.1 Load moving is performed to acceptable, safe working practices, Australian Standards, codes of practice and specifications
  • 2.2 Lifting gear is connected to load mover using safe and appropriate techniques
  • 2.3 Appropriate communication and signals are used to coordinate load movement safely
  • 2.4 Load is grounded or put down in a safe and stable manner according to prescribed procedure
  • 2.5 All lifting gear is detached from load mover and load
No information
No information
Replaces
State Code National Code Title Type
D3252 ICPSU235C Lift loads mechanically Unit of competency
Replaced By
State Code National Code Title Type
OBQ71 ICPSUP2360 Lift and shift loads mechanically Unit of competency