Unit of competency Outline

Date retreived
22/07/2026 6:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct Minor Mechanical Maintenance

Conduct Minor Mechanical Maintenance

Unit of competency
National Code
UEPOPS205A
State Code
S5151
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
29/05/2013
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2013
Nominal Hours
30
Description
1)
This unit deals with the skills and knowledge required to conduct a range of minor/basic maintenance functions associated with, but not limited to, mechanical equipment.
Notes
Elements and Performance Criteria
1 Plan and prepare for the work
  • 1.1 Work requirements are identified from request/work orders or equivalent and clarified/confirmed with appropriate parties or by site inspection
  • 1.2 Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers' specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedure
  • 1.3 Resources required to satisfy the work plan are identified, obtained and inspected for compliance with the job specifications
  • 1.4 Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan
  • 1.5 Correct size, type and quantity of materials/components are determined, obtained and inspected for compliance with the job specifications
  • 1.6 Work is planned in detail including sequencing and prioritising and considerations made, where appropriate, for the maintenance of plant security and capacity in accordance with system/site requirements
  • 1.7 Co-ordination requirements, including requests for isolations where appropriate, are resolved with others involved, affected or required by the work
  • 1.8 Potential hazards are identified and prevention and/or control measures are selected in accordance with the work plan and site procedures
  • 1.9 Work area is prepared in accordance with work requirements and site procedures
2 Conduct minor maintenance
  • 2.1 Required isolations are confirmed where appropriate in accordance with enterprise requirements
  • 2.2 Minor maintenance is conducted in accordance with the work plan and site requirements
  • 2.3 Minor adjustments are undertaken in accordance with prescribed procedures and schedules and site requirements
  • 2.4 Faults are reported to the relevant parties in accordance with site/enterprise procedures
3 Complete the work
  • 3.1 Work is completed and appropriate personnel notified in accordance with site/enterprise requirements
  • 3.2 Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures
  • 3.3 Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures
  • 3.4 Work completion details are finalised in accordance with site/enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
M1545 UTPNEG079A Conduct minor/basic mechanical maintenance Unit of competency
Replaced By
State Code National Code Title Type
WE305 UEPOPS205B Conduct minor mechanical maintenance Unit of competency