Unit of competency Outline

Date retreived
23/07/2026 6:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install or replace truss members

Install or replace truss members

Unit of competency
National Code
RIICTB308D
State Code
WH172
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to install or replace truss members in Civil Construction.This unit is appropriate for those working in operational roles Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install or replace truss members
  • 1.1 Access, interpret and apply truss members installation or replacement documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify, address and report hazards, risks and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Confirm and apply environmental protection and safety requirements
  • 1.6 Obtain, interpret and implement traffic management signage requirements
  • 1.7 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.8 Identify, confirm, safely handle and locate, ready for use, materials required for the work application
  • 1.9 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Produce and install truss members
  • 2.1 Remove defective truss members
  • 2.2 Measure truss members and prepare for installation or replacement
  • 2.3 Fabricate new truss members to replicate or improve old truss members
  • 2.4 Fit new truss members
  • 2.5 Apply durability treatments to the new truss members
  • 2.6 Install connectors and flashing to the new truss members
  • 2.7 Adjust king bolts and re-camber truss to achieve specified camber
  • 2.8 Remove bailey supports after new truss members are secured in place
3. Clean up
  • 3.1 Clear work area and dispose of or recycle materials
  • 3.2 Clean, check, maintain and store machinery, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCY42 RIICTB308E Install or replace truss members Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification