Unit of competency Outline

Date retreived
22/07/2026 5:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct ride on road marking operations

Conduct ride on road marking operations

Unit of competency
National Code
RIICRM301D
State Code
WH153
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/05/2014
Nominal Hours
12
Description
This unit describes a participant’s skills and knowledge required to conduct ride on road marking operations in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct ride on road marking operations
  • 1.1 Access, interpret and apply ride on marking operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Identify and implement traffic management signage requirements
  • 1.4 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.5 Identify, address and report hazards, risks and environmental issues
  • 1.6 Select and wear correct personal protective equipment appropriate for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Select fuel and lubricants
  • 2.1 Select fuel and lubricants for the required equipment operations
3. Carry out operator checks and maintenance
  • 3.1 Check and adjust fuel, oil, hydraulic fluid filters and water levels
  • 3.2 Tighten and maintain bolts, nuts and attachment couplings
  • 3.3 Check and adjust function of controls and gauges where necessary
  • 3.4 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures
  • 3.5 Carry out scheduled maintenance
  • 3.6 Safely locate plant and equipment when not in immediate use
4. Use ride on road marking plant
  • 4.1 Drive and operate equipment
  • 4.2 Configure lines to specification
  • 4.3 Apply new lines to the new or resurfaced area providing an even coverage
  • 4.4 Superimpose new lines over old lines on existing surfaces providing an even coverage
  • 4.5 Operate line cut on/cut off device
5. Clean up
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Return surplus fuel, lubricants, paints and beads to storage
  • 5.3 Clean, check, maintain and store plant, tools and equipment
  • 5.4 Carry out housekeeping activities
No information
No information
Replaces
State Code National Code Title Type
WB629 RIICRM301A Conduct ride on road marking operations Unit of competency
Replaced By
State Code National Code Title Type
OCY21 RIICRM301E Conduct ride on road marking operations Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification