Unit of competency Outline

Date retreived
23/07/2026 1:38 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare for and install mouldable refractory materials

Prepare for and install mouldable refractory materials

Unit of competency
National Code
PMC552092
State Code
BAH31
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
040399 - Building, N.e.c.
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to prepare for and install moulded refractory. It applies to installation with moulded refractory alone and with moulded refractory that needs to join to brick/block or cast refractory.This unit of competency applies to operators who are required to prepare for and carry out installation and repairs to procedures and specifications, mix and apply refractory mortars, correct any deficiencies in the quality of work and identify and take action on any problems.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Establish the suitability of resources
  • 1.1 Check all information conforms with resources and pneumatic ramming equipment
2 Prepare for and install mouldable refractory materials
  • 2.1 Prepare backgrounds, such as cutting out, demolition and keying
  • 2.2 Organise work to meet work deadlines
  • 2.3 Install refractory to appropriate procedures
  • 2.4 Carry out remedial work to meet the specifications
  • 2.5 Inform the person in charge that installation and any remedial work have been completed
  • 2.6 Store tools and equipment following organisational requirements for current legislation and official guidance
3 Contribute to controlling hazards in work area
  • 3.1 Identify hazards in work area
  • 3.2 Assess risks arising from those hazards
  • 3.3 Take appropriate action to control risks to procedures and duty of care
4 Respond to problems
  • 4.1 Identify possible problems in equipment or process
  • 4.2 Determine problems needing action
  • 4.3 Determine possible fault causes
  • 4.4 Rectify problem using appropriate solution within area of responsibility
  • 4.5 Follow through items initiated until final resolution has occurred
  • 4.6 Report problems outside area of responsibility to designated person
No information
No information
Replaces
State Code National Code Title Type
WA953 PMC552092B Prepare for and install mouldable refractory materials Unit of competency