Unit of competency Outline

Date retreived
23/07/2026 1:14 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and maintain automatic fire sprinklers

Test and maintain automatic fire sprinklers

Unit of competency
National Code
CPCPFS3047
State Code
OCO19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
27/11/2020
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
039905 - Fire Technology
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit of competency specifies the skills and knowledge required to conduct up to, and including five yearly routine service preventative maintenance, fault identification and repair of automatic fire sprinkler installations in new or existing, domestic or commercial structures. It includes performing maintenance tasks following specifications detailed in maintenance schedules, removing faulty items or components and replacing equipment or components to meet specifications.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Plan for work.
  • 1.1 Access, read and apply automatic fire sprinkler maintenance requirements from relevant job plans and specifications, codes, Australian Standards, manufacturer’s specifications and jurisdictional requirements.
  • 1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.
2 Prepare for work.
  • 2.1 Select and check the serviceability of appropriate tools, equipment and personal protective equipment (PPE).
  • 2.2 Identify materials and components and calculate quantities.
  • 2.3 Check materials and components for conformity with delivery docket and report any inconsistencies.
  • 2.4 Carry out preparation of work area to support efficient service maintenance of automatic fire sprinklers.
3 Perform routine maintenance tasks.
  • 3.1 Isolate system interfaces.
  • 3.2 Apply maintenance tasks, following specifications detailed in maintenance schedule and AS 1851 Routine service of fire protection systems and equipment.
  • 3.3 Check mechanical equipment and system components using appropriate instruments.
  • 3.4 Identify faulty items or components and select appropriate service procedure.
4 Repair or replace faulty components and test job.
  • 4.1 Isolate system and drain down, as required, to complete tasks without causing water damage.
  • 4.2 Remove faulty items or components without damage to other components.
  • 4.3 Select replacement items or components to meet manufacturer’s specifications.
  • 4.4 Adjust equipment or components as required.
  • 4.5 Recharge system with water.
  • 4.6 Carry out operational system check to ensure job specifications and quality requirements are met.
  • 4.7 Prepare maintenance report in appropriate format.
5 Clean up.
  • 5.1 Clear the work area, and dispose of or recycle materials as applicable, following quality and work requirements and job specifications.
  • 5.2 Clean, check, maintain and store tools and equipment following manufacturer’s and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
WI770 CPCPFS3047A Test and maintain automatic fire sprinklers Unit of competency
State Code National Code Title Type
BGC1 CPC32820 Certificate III in Fire Protection Qualification