Unit of competency Outline

Date retreived
21/07/2026 11:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Appearance grade hardwood sawn and milled products

Appearance grade hardwood sawn and milled products

Unit of competency
National Code
FWPCOT2246
State Code
OBM65
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030305 - Materials Engineering
Original Release Date
29/05/2020
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to visually assess hardwood sawn and milled products for classification into various appearance grades. The unit applies to individuals who grade hardwood sawn and milled products in a timber processing or manufacturing facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for appearance grading
  • 1.1 Review and clarify work order with appropriate personnel to determine hardwood sawn and milled products to be graded
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with grading hardwood sawn and milled products
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Obtain type, dimension and quantity of sawn and milled products to be graded from storage locations
  • 1.6 Select equipment, including lifting equipment, appropriate to work order and check for safety and operational effectiveness
  • 1.7 Establish and maintain communication with others at the workplace to ensure safety
2. Appearance grade products
  • 2.1 Visually assess the size of sawn and milled products according to industry standards and estimated number of ranges
  • 2.2 Evaluate the characteristics of each product against industry standards for grade type
  • 2.3 Measure moisture content and evaluate against standards and seasoning requirements
  • 2.4 Mark product characteristics for docking
  • 2.5 Sort and label product according to grade classification
  • 2.6 Reject and redirect sub-standard product for recycling or other uses according to workplace and environmental protection procedures
  • 2.7 Record and report grading outcomes and distribution problems to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXL89 FWPCOT2212 Grade hardwood sawn and milled products Unit of competency