Unit of competency Outline

Date retreived
23/07/2026 12:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out operational maintenance

Carry out operational maintenance

Unit of competency
National Code
RIISAM209E
State Code
OBW73
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/03/2021
Nominal Hours
50
Description
This unit describes the skills and knowledge required to carry out operational maintenance in the resources and infrastructure industries.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of own work outcomes.Licensing, legislative and certification requirements mayapply to this unit and can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to carry out operational maintenance
  • 1.1 Obtain, interpret, and confirm work requirements
  • 1.2 Access, interpret and apply documentation and procedures
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures within scope of own role and according to workplace procedures
  • 1.4 Select and wear personal protective equipment required for the work activities
  • 1.5 Obtain and interpret emergency procedures and prepare for emergency situations within scope of own role
  • 1.6 Determine coordination requirements with others prior to commencing and during work activities
2. Perform prestart checks and maintenance
  • 2.1 Inspect and carry out prestart checks on equipment
  • 2.2 Complete site and company checklist sheets
  • 2.3 Lubricate all systems according to workplace procedures
  • 2.4 Check and top up fluid levels and bleed according to workplace procedures
  • 2.5 Check filters and clean or replace as required according to workplace procedures
  • 2.6 Check security of all circulation systems
  • 2.7 Check safety appliances are fitted and meet requirements for workplace activities
  • 2.8 Keep cabin, seat belts and windscreen clean and windscreen washer functioning according to manufacturer specifications
3. Perform equipment checks
  • 3.1 Carry out timed and regular equipment checks and record details
  • 3.2 Identify faults and potential faults and report immediately to relevant personnel
  • 3.3 Obtain and confirm isolation, tag out and lock out procedures
  • 3.4 Identify, record and report equipment that requires repairs or maintenance in a timely manner
  • 3.5 Monitor the effectiveness of maintenance performed
4. Carry out hot work
  • 4.1 Clear area around the worksite of flammable material
  • 4.2 Position fire extinguishers at company recommended locations
  • 4.3 Undertake hot work in compliance with regulatory and worksite fire controls
  • 4.4 Communicate with spotter during hot work operations
  • 4.5 Inspect the worksite to confirm that no potential exists for later combustion
5. Perform equipment maintenance
  • 5.1 Perform scheduled equipment, components and consumables servicing, maintenance and overhauls according to workplace procedures
  • 5.2 Use tag out or lock out procedures to isolate the equipment during servicing
  • 5.3 Carry out minor servicing of equipment in a timely manner according to workplace procedures
  • 5.4 Carry out routine inspections, servicing, lubrication and housekeeping tasks according to workplace procedures
  • 5.5 Identify and change used parts and record the frequency of replacement
  • 5.6 Identify operational faults in and maintain hydraulic, pneumatic and drive systems according to workplace procedures
  • 5.7 Record details of maintenance action completed
  • 5.8 Inspect and check plant and equipment for serviceability, and identify, rectify and report any faults
6. Perform field repairs
  • 6.1 Isolate and rectify equipment faults according to workplace procedures
  • 6.2 Identify the extent of repair needed and obtain the required parts
  • 6.3 Identify, select and use tools required for maintenance and repairs
  • 6.4 Return the re-usable tools and parts
  • 6.5 Recognise system faults and formulate appropriate responses within agreed timelines
  • 6.6 Maintain records of action taken
  • 6.7 Dismantle, assess, service, repair, reassemble and test components
No information
No information
Replaces
State Code National Code Title Type
WH659 RIISAM209D Carry out operational maintenance Unit of competency