Unit of competency Outline

Date retreived
22/07/2026 11:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Run and monitor in-line bottom making machine for sack or bag manufacture

Run and monitor in-line bottom making machine for sack or bag manufacture

Unit of competency
National Code
ICPCBF301
State Code
AUN35
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to operate and monitor an in-line bottom making machine for the manufacture of sacks or bags with minimum downtime.This unit applies to skilled operators working in the sacks and bags area in the printing industry who may have to solve problems, provide leadership and guidance to others, and who have some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Monitor production process
  • 1.1 Details required for the job are checked and confirmed against job specifications
  • 1.2 Supply of materials throughout the run is maintained
  • 1.3 Paper tension is monitored on an ongoing basis
  • 1.4 Machine is run at optimum speed for maintaining quality of output
  • 1.5 Machine is adjusted to maintain quality of output
2. Monitor production
  • 2.1 Correct perforation alignment is maintained
  • 2.2 Pick-up rollers are working correctly and pressure and timing are maintained
  • 2.3 Glue patch applicator or glue impression roller remains clear and dispenses required amount of glue
  • 2.4 Doctor blades and hot melt unit are operating correctly
  • 2.5 Timing between all units is maintained or adjusted to avoid production problems
  • 2.6 Overall production is monitored and adjustments made to avoid production problems and improve production speeds
3. Maintain quality
  • 3.1 Correct procedures for removal of waste are followed according to enterprise procedures
  • 3.2 Samples are continuously monitored for defects, and defects are removed
  • 3.3 Efficiency, quality and output rate of production run are monitored for problems, and any deficiencies resolved
  • 3.4 Locations of all emergency shutdown buttons and triggers are known
4. Identify problems and rectify
  • 4.1 Faults which affect quality of the sacks or bags are identified and rectified
  • 4.2 Problems that reduce rate of output are identified and fixed
  • 4.3 Faults that affect efficient operation of equipment are identified and resolved
No information
No information
Replaces
State Code National Code Title Type
D3043 ICPCF3101C Run and monitor in-line bottom making machine for sack or bag manufacture Unit of competency