Unit of competency Outline

Date retreived
22/07/2026 11:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Place and cut millinery patterns

Place and cut millinery patterns

Unit of competency
National Code
MSTML2005
State Code
BAV14
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to place and cut millinery patterns from millinery materials.The unit of competency applies to selecting and using patterns, shapes or templates to cut millinery materials. Millinery materials include millinery fabrications, and cutting equipment will vary according to the requirements of the millinery item.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to cut millinery patterns
  • 2.1 Select and prepare tools, equipment and work area according to workplace procedures
  • 2.2 Select and prepare millinery patterns and materials
  • 2.3 Check patterns and materials against specifications and quality standards
  • 2.4 Identify special placement and cutting requirements of materials
3 Lay out millinery materials and patterns
  • 3.1 Lay out a single ply of materials in accordance with specifications and placement and cutting requirements
  • 3.2 Lay out multiple plies of materials in accordance with specifications and placement and cutting requirements
  • 3.3 Manipulate patterns according to specifications
  • 3.4 Transfer pattern shapes to material ready for cutting
4 Cut out millinery shapes and finalise work
  • 4.1 Cut material using cutting equipment suited to the requirements of the millinery item
  • 4.2 Cut straight lines, curves and angles accurately and smoothly
  • 4.3 Inspect cut pieces for quality and rectify cutting faults
No information
No information
Replaces
State Code National Code Title Type
W7412 LMTML2005A Place and cut millinery patterns Unit of competency