Unit of competency Outline
Date retreived
24/07/2026 12:39 AM AWST
24/07/2026 12:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Examine steel structures
Examine steel structures
Unit of competency
National Code
TLIB3088A
TLIB3088A
State Code
D4995
D4995
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/10/2014
Field of Education
030903 - Structural Engineering
Original Release Date
30/10/2014
Nominal Hours
35
Description
This unit involves the skills and knowledge required to examine steel structures in accordance with safeworking and regulatory requirements and workplace procedures. It includes obtaining all relevant previous reports, performing the detailed examination, initiating appropriate necessary actions if any, and completing all required documentation. Licensing or certification requirements are not applicable to this unit.
Notes
Elements and Performance Criteria
1Obtain previous reports
- 1.1 Operational history of structure is reviewed from available sources
- 1.2 Previous defects identified in reports are noted to enable rechecking of problem areas
- 1.3 Relevant personnel are contacted to identify any reported complaints or indications of wear or damage
2Perform detailed examination
- 2.1 Steel structures and components are visually inspected and checked for signs of buckling, cracking, corrosion, deterioration and damage in accordance with workplace procedures
- 2.2 Connections between steel components are visually inspected and checked for signs of wear looseness, cracking, corrosion, deterioration and damage in accordance with workplace procedures
- 2.3 Protective coatings on steel structures and components are visually inspected and checked for condition
- 2.4 Relevant inspection aids are used to perform detailed inspection to identify defects in accordance with workplace procedures
- 2.5 Defects or deficiencies are identified in accordance with workplace procedures
3Take appropriate actions
- 3.1 Major defects affecting safe passage are acted on as soon as possible in accordance with workplace procedures
- 3.2 Defects and deficiencies are reported to enable repairs to be effected in a timely manner
4Complete documentation
- 4.1 Examination schedule or work report data is completed in accordance with workplace procedures
- 4.2 Documentation on work undertaken is completed in accordance with workplace requirements
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
by day or night
in all weather conditions
Work may be conducted in:
restricted spaces or exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals, dangerous or hazardous substances
movements of equipment, materials and vehicles
Structures may include:
underbridges
overbridges
footbridges
culverts
tunnels
retaining walls
platforms
overhead wiring structures
signal gantries
noise barriers
service crossings
buffer stops
lighting towers
water towers
turntables
elevated roads
Equipment may include:
torch
geologists hammer
measuring tape
wire brush
spirit level with straight edge
plumb bob
camera
binoculars
mirror
vernier calipers
ultrasonic tester
dry film thickness gauge
demec gauge, points and adhesive
scaffolding
extension ladder
elevated work platforms (EWP)
boat or barge
Structures examination methods may include:
visual examination
hammer test
magnetic or electronic gauges
dye penetrant
magnetic particle
ultrasonic testing
x-ray
Liaison may include:
internal/external personnel from other work areas (e.g. train controllers)
road authorities
local councils
landowners
Communication equipment systems may include:
two-way radios
telephones/mobile phones
agreed audible or hand signals
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Depending on work context, safety and personal protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios/mobile phones
hand lamps
flags
tripods
harness and ropes
respirator
safety mask
gas detectors
safety devices
Information/documents may include:
local authority regulations and procedures
work orders
examination reports and defect lists
relevant log or record book
local instructions
manufacturers or workplace equipment instructions and operation manuals
emergency procedure manuals
two-way radio/mobile phone operation procedures
emergency procedures manual
conditions of service, legislation and industrial agreements including workplace agreements and awards
Information may be provided:
electronically
in writing, via forms/documents/plans
orally, via face-to-face communications
via trackside signals
Applicable regulations and legislation may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant state/territory regulations, codes of practice and safeworking system requirements
relevant Australian Standards and related requirements, including AS 4292
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
by day or night
in all weather conditions
Work may be conducted in:
restricted spaces or exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals, dangerous or hazardous substances
movements of equipment, materials and vehicles
Structures may include:
underbridges
overbridges
footbridges
culverts
tunnels
retaining walls
platforms
overhead wiring structures
signal gantries
noise barriers
service crossings
buffer stops
lighting towers
water towers
turntables
elevated roads
Equipment may include:
torch
geologists hammer
measuring tape
wire brush
spirit level with straight edge
plumb bob
camera
binoculars
mirror
vernier calipers
ultrasonic tester
dry film thickness gauge
demec gauge, points and adhesive
scaffolding
extension ladder
elevated work platforms (EWP)
boat or barge
Structures examination methods may include:
visual examination
hammer test
magnetic or electronic gauges
dye penetrant
magnetic particle
ultrasonic testing
x-ray
Liaison may include:
internal/external personnel from other work areas (e.g. train controllers)
road authorities
local councils
landowners
Communication equipment systems may include:
two-way radios
telephones/mobile phones
agreed audible or hand signals
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Depending on work context, safety and personal protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios/mobile phones
hand lamps
flags
tripods
harness and ropes
respirator
safety mask
gas detectors
safety devices
Information/documents may include:
local authority regulations and procedures
work orders
examination reports and defect lists
relevant log or record book
local instructions
manufacturers or workplace equipment instructions and operation manuals
emergency procedure manuals
two-way radio/mobile phone operation procedures
emergency procedures manual
conditions of service, legislation and industrial agreements including workplace agreements and awards
Information may be provided:
electronically
in writing, via forms/documents/plans
orally, via face-to-face communications
via trackside signals
Applicable regulations and legislation may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant state/territory regulations, codes of practice and safeworking system requirements
relevant Australian Standards and related requirements, including AS 4292
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
examining a range of structure types
taking appropriate action for identified defects
completing documentation of examination results
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
in an appropriate range of situations in the workplace
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
examining a range of structure types
taking appropriate action for identified defects
completing documentation of examination results
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVK46 | TLIB3088 | Examine steel structures | Unit of competency |
