Unit of competency Outline

Date retreived
22/07/2026 2:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect and refit wheel hubs and associated brake components

Remove, inspect and refit wheel hubs and associated brake components

Unit of competency
National Code
AURTTJ002
State Code
AXA65
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and refit wheel hubs and associated brake components during the rectification of faults in steering and suspension systems. It involves identifying and confirming work requirements, preparing for the work, removing and refitting the wheel hubs and associated brake components, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The hubs and associated brake components include those of light vehicles, four wheel drive vehicles or light commercial vehicles. This unit does not involve servicing or repairing braking systems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and refit wheel hubs and associated brake components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal, refitting and adjustment information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect wheel hubs and associated brake components
  • 2.1 Components are identified and removed according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 2.2 Components are inspected according to manufacturer specifications and workplace procedures
  • 2.3 recommendations for necessary repairs, replacements or adjustments
3. Refit and adjust wheel hubs and associated brake components
  • 3.1 Refitting options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Wheel hubs and associated brake components are fitted and adjusted according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.3 Wheel hub adjustment and wheel nuts are tightened according to manufacturer specifications and workplace procedures
  • 3.4 Components are checked for correct assembly and operation according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF419 AURTTJ2002 Remove and refit wheel hubs and associated brake components Unit of competency
Replaced By
State Code National Code Title Type
OAK16 AURTTJ012 Remove, inspect and refit wheel hubs and associated brake components Unit of competency