Unit of competency Outline

Date retreived
22/07/2026 5:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Acquire data related to imagery

Acquire data related to imagery

Unit of competency
National Code
DEFEXO154
State Code
AVR46
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
26/10/2020
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to acquire data related to imagery (film, video and digital) in a proof and experimental environment. Explosive ordnance proof tests are conducted to ensure weapons systems or explosive ordnance, in service with Defence, meet the required standards. The acquisition of data related to imagery is a common component of proof tests.This unit was developed for data acquisition specialists working within proof and experimental organisations in Defence or original equipment manufacturer, but is applicable to any individual in this field of work.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit must demonstrate the ability to work as individuals and as part of a team under direct and/or indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform complex tasks in a range of known contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for data collection
  • 1.1 Obtain and confirm test plan
  • 1.2 Brief stakeholders and test participants in accordance with the test plan
  • 1.3 Check and initiate safety systems and procedures in accordance with test plan
  • 1.4 Schedule key activities and timelines with full consideration to the specification and available resources
  • 1.5 Comply with and record administrative and legal requirements for data collection
  • 1.6 Communicate responsibilities to staff to ensure clarity of understanding of the work and to provide a basis for ongoing assessment
  • 1.7 Select and install data collection equipment in accordance with the data collection plan
2 Gather data
  • 2.1 Operate equipment according to manufacturer's specification, statutory and organisational policies and guidelines
  • 2.2 Collect data using methodologies detailed in the data collection plan
  • 2.3 Document metadata according to accepted industry standards
  • 2.4 Identify and plan for discrepancies between specification and actual activities
3 Finalise the collection process
  • 3.1 Complete and store data and documentation
  • 3.2 Check data integrity in accordance with the validation plan
No information
No information
No information