Unit of competency Outline

Date retreived
23/07/2026 12:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Implement a tree protection program

Implement a tree protection program

Unit of competency
National Code
AHCARB321
State Code
OBV58
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/08/2020
View on TGA
State Implementation and Classification
Approved Date
13/11/2020
Field of Education
050301 - Horticulture
Original Release Date
13/11/2020
Nominal Hours
24
Description
This unit of competency describes the skills and knowledge required to identify trees in need of temporary protection and implement a protection program according to specifications.The unit applies to individuals who work in arboriculture under broad direction and take responsibility for their own work. They use discretion and judgement in the selection, allocation and use of available resources and for solving problems.The arboriculture industry requires that all tree protection work is undertaken according to preferred industry practices (as outlined in the Companion Volume), including Australian Standard AS4970.Legislation, regulations and by-laws relating to the treatment and removal of trees apply in some states and territories.
Notes
Elements and Performance Criteria
1. Determine implementation requirements of the tree protection program
  • 1.1 Receive and interpret tree protection plan and specifications
  • 1.2 Undertake a site-specific job safety analysis (JSA), record and implement control measures according to workplace safety procedures
  • 1.3 Confirm availability of first aid equipment and emergency procedures
  • 1.4 Identify and access tools, equipment and materials required to implement program
  • 1.5 Determine, schedule and allocate tasks to work team, allowing for contingencies
2. Prepare site for tree protection
  • 2.1 Identify location of tree protection zone from site plan
  • 2.2 Select, prepare, and carry out pre-operational and safety checks, on tools, equipment and machinery
  • 2.3 Select, check and use personal protective equipment
  • 2.4 Survey the tree protection zone and delineate specified boundaries according to workplace procedures
  • 2.5 Install protective barriers and signage according to tree protection plan
3. Install tree protection measures
  • 3.1 Identify requirements for trunk, branch and root protection from tree protection plan
  • 3.2 Select and assemble materials and equipment required to install tree protection measures
  • 3.3 Construct and install protection measures specified in the program
  • 3.4 Inspect completed protection measures and take remedial action where out-of-specification
4. Monitor protection program
  • 4.1 Monitor tree health during scheduled program period
  • 4.2 Assess effectiveness of protection measures during the scheduled period
  • 4.3 Implement remedial action where tree health has been compromised
  • 4.4 Dismantle and remove protection measures and fencing at conclusion of scheduled period
  • 4.5 Clean, maintain and store tools and equipment according to workplace procedures
  • 4.6 Update records and report tree protection outcomes according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAP02 AHCARB309 Implement a tree protection program Unit of competency