Unit of competency Outline

Date retreived
23/07/2026 1:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain an electronic system

Maintain an electronic system

Unit of competency
National Code
ICTTEN308
State Code
AWD50
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to inspect critical aspects of electronic systems, and replace and dispose of items confirming performance is within specification and operating levels are normal.It applies to individuals working as technicians on site and from remote locations. This work does not include the major servicing of equipment or repair due to breakdowns.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to maintain system
  • 1.1 Consult with customer or property owner to arrange site access if required
  • 1.2 Plan schedule of routine preventive maintenance for electronic system based on recommended maintenance periods from manufacturer’s handbooks and specifications
  • 1.3 Report to appropriate person the impact of proposed maintenance activities on customer’s service delivery
  • 1.4 Confirm equipment is accessible and correctly set up for on-site preventive maintenance activities and for remote interrogation if required
  • 1.5 Confirm alarms are functioning according to manufacturer’s specifications and enterprise guidelines
  • 1.6 Take corrective action if anomalies or faults are detected, according to enterprise guidelines and manufacturer’s specifications
2. Undertake preventive maintenance routines on site and remotely
  • 2.1 Conduct preventive maintenance according to planned schedule
  • 2.2 Report to appropriate person any instances where maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
  • 2.3 Verify equipment is functioning against expected operational parameters to confirm operational status
  • 2.4 Take corrective action if faults are detected, according to enterprise guidelines and manufacturer’s specifications
  • 2.5 Escalate to next level of support when required, where preventive maintenance activity falls outside own level of expertise
  • 2.6 Dispose of on-site waste materials according to safe working practices and approved procedures
3. Make recommendations and update records
  • 3.1 Record results of routine tests and make recommendations
  • 3.2 Store records according to enterprise guidelines
No information
No information
Replaces
State Code National Code Title Type
D3450 ICTTEN3104A Maintain an electronic system Unit of competency
Replaced By
State Code National Code Title Type
OBA35 ICTTEN321 Maintain an electronic system Unit of competency