Unit of competency Outline
Date retreived
22/07/2026 1:43 AM AWST
22/07/2026 1:43 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Construct indirect composite/polymer fixed restorations
Construct indirect composite/polymer fixed restorations
Unit of competency
National Code
HLTDT16A
HLTDT16A
State Code
C4994
C4994
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
10/02/2003
Field of Education
060705 - Dental Technology
Original Release Date
10/02/2003
Nominal Hours
10
Description
Notes
Elements and Performance Criteria
No information
Types of restoration may include fixed restorations such as:
Single full crowns
Bridges
Maryland bridges
Implant supported restorations
Veneers
Inlays
Half and three-quarter crowns
On-lays
Single full crowns
Bridges
Maryland bridges
Implant supported restorations
Veneers
Inlays
Half and three-quarter crowns
On-lays
Critical aspects of assessment:
The restorations produced must be suitable for insertion in the mouth
All work complies with relevant legislative requirements
Underpinning knowledge:
Relevant material science for carrying out procedures
Articulation and occlusion
Tooth morphology
Oral anatomy
MSDS sheets
Colour
Current NHMRC infection control guidelines
Metallurgy
Polymer science
Underpinning skills:
Manual dexterity
Carving restorations
Efficient use of materials
Colour and shade matching
Cleanliness
Analysis of faults
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role. The following units are pre-requisites for this unit:
HLTIN1A Comply with infection control policy and procedures
HLTDT6A Wax, process and finish acrylic dentures and appliances
HLTDT13A Construct ceramic restorations
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
The restorations produced must be suitable for insertion in the mouth
All work complies with relevant legislative requirements
Underpinning knowledge:
Relevant material science for carrying out procedures
Articulation and occlusion
Tooth morphology
Oral anatomy
MSDS sheets
Colour
Current NHMRC infection control guidelines
Metallurgy
Polymer science
Underpinning skills:
Manual dexterity
Carving restorations
Efficient use of materials
Colour and shade matching
Cleanliness
Analysis of faults
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role. The following units are pre-requisites for this unit:
HLTIN1A Comply with infection control policy and procedures
HLTDT6A Wax, process and finish acrylic dentures and appliances
HLTDT13A Construct ceramic restorations
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| D8193 | HLTDT516C | Construct indirect composite polymer fixed restorations | Unit of competency |
| C9199 | HLTDT516B | Construct indirect composite polymer fixed restorations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C449 | HLT50502 | Diploma of Dental Technology | Qualification |
| 6858 | 51179 | Certificate IV in Dental Technology | Accredited course |