Unit of competency Outline

Date retreived
23/07/2026 12:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate calender

Operate calender

Unit of competency
National Code
PMBPROD207
State Code
BAJ37
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
70
Description
This unit of competency covers the skills and knowledge required to operate calendering equipment and ancillary equipment that is integral to the process. Calendering is typically used to convert plastic or rubber compound into sheets or to cover/impregnate fabric, wire or other webs.This unit of competency applies to operators who are required to carry out pre-start, start and stop procedures, maintain feed to the calender, monitor and adjust the calender and recognise routine and non-routine problems and take appropriate action. This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check work requirements
  • 1.1 Identify work requirements from production plan or request
  • 1.2 Check product, materials and equipment requirements for job
  • 1.3 Recognise requirements which may not be in accordance with usual practice
  • 1.4 Ask questions of appropriate person to confirm unusual practice
  • 1.5 Ensure housekeeping is to requirements
  • 1.6 Identify hazards associated with the job and take appropriate action
  • 1.7 Perform other pre-operational checks in accordance with procedures
2 Start up calendering equipment to procedure
  • 2.1 Conduct pre-start checks on equipment
  • 2.2 Start up calendering equipment
3 Operate equipment to procedures
  • 3.1 Check process is operating within required limits
  • 3.2 Check product is in specification and to required quality standard
  • 3.3 Ensure product is consistently ready for next operation
  • 3.4 Maintain supply of materials as required
  • 3.5 Complete logs and records as required
  • 3.6 Collect and segregate scrap, trim and other materials as required
  • 3.7 Keep equipment and work area clean
  • 3.8 Shut down calender as required
4 Respond to routine problems in accordance with procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine problems and report to designated person
No information
No information
Replaces
State Code National Code Title Type
W7558 PMBPROD207B Operate calender Unit of competency
Replaced By
State Code National Code Title Type
ODA85 PMBPROD207E Operate rubber calendering equipment Unit of competency