Unit of competency Outline

Date retreived
22/07/2026 5:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rework and repair (electrical/electronic production)

Rework and repair (electrical/electronic production)

Unit of competency
National Code
MEM03005
State Code
OAX36
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
Nominal Hours
72
Description
This unit of competency defines the skills and knowledge required to test electrical/electronic assemblies against functional requirements, identify faults, and repair or rework the assemblies to rectify the faults and applies to work undertaken on a range of components and printed circuit boards. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of manual handling is required unit MEM11011 Undertake manual handling should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of power tools for hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 8
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Perform tests
  • 2.1 Test assembly for functional requirements from job sheets
  • 2.2 Identify faults in assembly or soldering
3 Identify cause of fault and rectify fault
  • 3.1 Identify cause of fault using procedures
  • 3.2 Complete repair and/or rework according to instructions from job cards, sketches and assembly specifications
  • 3.3 Handle and store components safely using appropriate anti-static handling procedures and techniques
No information
No information
Replaces
State Code National Code Title Type
W5269 MEM03005B Rework and repair (electrical/electronic production) Unit of competency