Unit of competency Outline
Date retreived
23/07/2026 12:33 AM AWST
23/07/2026 12:33 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Develop an application for, or variation to, rail accreditation
Develop an application for, or variation to, rail accreditation
Unit of competency
National Code
TLIF4099A
TLIF4099A
State Code
WG220
WG220
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
05/11/2014
Field of Education
061301 - Occupational Health And Safety
Original Release Date
05/11/2014
Nominal Hours
35
Description
This unit involves the skills and knowledge required to develop an application for rail safety accreditation.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Identify requirements for accreditation or variation application
- 1.1 Documentation and requirements relevant to the application for, or variation to, accreditation is accessed and interpreted
- 1.2 Policies and objectives that express the organisation's commitment to regulatory compliance management are developed
- 1.3 Plan is prepared for the development of compliance requirements
- 1.4 Required resources are identified and maintained to support the plan and approval from relevant personnel is gained
- 1.5 Framework for the regulatory compliance management system is established and implemented
- 1.6 Scope of proposed compliance requirements and resources is determined in consultation with relevant personnel and regulatory compliance is integrated in to all relevant documentation
- 1.7 Consultation process is documented, information on the regulatory compliance system and procedures is explained and ready access to this information by all relevant stakeholders is ensured
2 Collate, compile and submit application for accreditation or variation
- 2.1 Relevant documentation relating to governance, scope of operations, systems and procedures to meet application requirements is collected
- 2.2 Endorsement and sign off of documents by relevant authorising officers is ensured
- 2.3 Required resources to meet scope of operations are identified and documented
- 2.4 Completed application with supporting evidence is verified prior to sign off by senior management
- 2.5 Finalised application is submitted to the relevant jurisdiction regulatory body
- 2.6 Requests for further details or additional information are acted upon in a timely manner
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Components of a regulatory system include:
policy documents
procedures
Depending on the organisation, operating procedures may include:
standard operating procedures
company procedures
enterprise procedures
organisational procedures
established procedures
Information and documents may include:
commonwealth and state/territory regulations and guidelines concerning fatigue management in various transport and workplace situations
fatigue risk management system documents
workplace instructions and procedures on fatigue management
reports of audits of fatigue risk management system
error and safety incident reports
relevant occupational health and safety (OH&S) regulations and procedures
relevant standards and certification requirements
quality assurance procedures
Applicable legislation, regulations and codes may include:
relevant national and/or state/territory regulatory requirements
relevant state/territory permit regulations and requirements
relevant state/territory OH&S legislation
Components of a regulatory system include:
policy documents
procedures
Depending on the organisation, operating procedures may include:
standard operating procedures
company procedures
enterprise procedures
organisational procedures
established procedures
Information and documents may include:
commonwealth and state/territory regulations and guidelines concerning fatigue management in various transport and workplace situations
fatigue risk management system documents
workplace instructions and procedures on fatigue management
reports of audits of fatigue risk management system
error and safety incident reports
relevant occupational health and safety (OH&S) regulations and procedures
relevant standards and certification requirements
quality assurance procedures
Applicable legislation, regulations and codes may include:
relevant national and/or state/territory regulatory requirements
relevant state/territory permit regulations and requirements
relevant state/territory OH&S legislation
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
identifying relevant internal and external persons relevant to an application for rail accreditation
developing an application or variation to an accreditation submission
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
identifying relevant internal and external persons relevant to an application for rail accreditation
developing an application or variation to an accreditation submission
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVJ18 | TLIF4099 | Develop an application for, or variation to, rail accreditation | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J807 | TLI50613 | Diploma of Rail Operations Management | Qualification |
| J540 | TLI42413 | Certificate IV in Rail Safety Management | Qualification |