Unit of competency Outline

Date retreived
22/07/2026 5:04 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect, repair and refit industrial tyres and tubes

Remove, inspect, repair and refit industrial tyres and tubes

Unit of competency
National Code
AURHTJ007
State Code
OAK21
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/12/2018
View on TGA
State Implementation and Classification
Approved Date
15/03/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
15/03/2019
Nominal Hours
35
Description
This unit describes the performance outcomes required to remove and refit tyres and tubes from the wheels and rims of industrial equipment. It involves identifying and confirming work requirements, preparing for the work, inspecting, repairing and refitting the tyres and tubes, and completing workplace processes and documentation.It applies to those who fit tyres to wheel assemblies and rim assemblies in the automotive industrial sector.Licensing, legislative, regulatory, Australian standards or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to remove, repair and refit industrial tyres and tubes
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Obtain and interpret tyre and tube remove, inspect, repair and refit information
  • 1.3 Identify hazards and environmental issues, assess potential risks, and implement control measures in line with workplace policies
  • 1.4 Select tools, equipment and materials and check for serviceability
2. Remove and inspect tyres, tubes and wheels
  • 2.1 Remove tyres and tubes from wheels according to manufacturer procedures, workplace procedures and safety and environmental requirements
  • 2.2 Inspect tyres, tubes, wheels or rims according to manufacturer specifications and workplace procedures
  • 2.3 Report inspection findings and make recommendations for necessary repairs according to workplace procedures
3.Repair and refit tyres and tubes
  • 3.1 Analyse repair options and select those most appropriate to the circumstances according to workplace procedures
  • 3.2 Repair tyres and tubes according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.3 Mount tyre to wheel or rim according to manufacturer specifications and workplace procedures without causing damage to components or systems
  • 3.4 Check assembled wheel for serviceability and correct assembly, and inflate according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Complete final inspection to ensure work meets workplace expectations and assembled wheel is presented ready for use
  • 4.2 Clear work area and dispose of waste or recycle materials according to workplace procedures
  • 4.3 Examine and store tools and equipment according to workplace procedures
  • 4.4 Complete documentation according to workplace procedures
No information
No information
No information