Unit of competency Outline
Date retreived
22/07/2026 1:42 AM AWST
22/07/2026 1:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assess dentition
Assess dentition
Unit of competency
National Code
MTMP2091C
MTMP2091C
State Code
D8835
D8835
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Field of Education
110105 - Butchery
Original Release Date
Nominal Hours
10
Description
This unit covers the skills and knowledge required to assess dentition and record the results.
Notes
Elements and Performance Criteria
1. Expose all incisor teeth
- 1.1. Incisor teeth are exposed.
- 1.2. Permanent incisors are differentiated from milk teeth.
- 1.3. The number of permanent incisors is counted correctly.
- 1.4. Dentition is assessed to workplace, regulatory and Occupational Health and Safety (OH&S) requirements.
- 1.5. Sterilisation techniques are followed prior to, and during, the assessment of dentition.
2. Record the dentition
- 2.1. The number of permanent incisor teeth is identified and accurately recorded in accordance with workplace requirements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Regulatory requirements may include:
Export Control Act
hygiene and sanitation requirements
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
federal, state and territory regulations regarding meat processing.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Regulatory requirements may include:
Export Control Act
hygiene and sanitation requirements
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
federal, state and territory regulations regarding meat processing.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Dentition assessment must be performed at a pace that is the same as the pace of production.
Context of, and specific resources for assessment
Assessment must occur in an operating abattoir under normal processing conditions.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Dentition assessment must be performed at a pace that is the same as the pace of production.
Context of, and specific resources for assessment
Assessment must occur in an operating abattoir under normal processing conditions.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BBA11 | AMPA2080 | Assess dentition | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D595 | MTM20111 | Certificate II in Meat Processing (Abattoirs) | Qualification |