Unit of competency Outline

Date retreived
23/07/2026 6:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate automated topping system as part of tree production nursery operations

Operate automated topping system as part of tree production nursery operations

Unit of competency
National Code
FWPNSY3007
State Code
ODV94
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/06/2022
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to operate an automated topping system as part of tree production nursery operations.The unit applies to individuals who operate automated topping systems as part of tree production nursery operations.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Determine job requirements from work order or instruction, and where required seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental requirements, including use of personal protective equipment and machine guards, for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with working with automated topping system
  • 1.4 Consult with team members to ensure that automated topping system operations are coordinated effectively
  • 1.5 Select seedlings to be trimmed according to job requirements
  • 1.6 Confirm production capacity and full range of functions of automated topping system
2. Set up topping system
  • 2.1 Check existence and serviceability of safety equipment, including emergency stops, gauges, guards and controls
  • 2.2 Select topping system program and make adjustments according to job requirements and manufacturer instructions
  • 2.3 Load and/or position seedlings according to manufacturer instructions and production requirements
  • 2.4 Conduct trial runs to check topping operation, accuracy, alignment and that finished product meets quality requirements
  • 2.5 Make necessary adjustments to topping system settings based on outcomes of trial runs
3. Operate topping system
  • 3.1 Complete automated topping system start-up procedure according to manufacturer instructions
  • 3.2 Operate automated topping system according to designed capacity, purpose and manufacturer recommendations
  • 3.3 Monitor topping system operation to ensure product quality and output
  • 3.4 Minimise waste according to workplace and environmental protection procedures
  • 3.5 Recycle, reuse or dispose of cuttings according to workplace procedures
  • 3.6 Identify problems with the required work and/or the operation of the automated topping system, and rectify or report to appropriate persons
  • 3.7 Shut topping system down according to workplace procedures
  • 3.8 Record production outcomes and equipment faults or malfunctions and corrective actions taken according to workplace procedures
4. Maintain topping equipment
  • 4.1 Perform routine maintenance according to purpose and manufacturer recommendations
  • 4.2 Tag and report faulty and/or defective equipment according to workplace procedures
No information
No information
No information
State Code National Code Title Type
BHK7 FWP30122 Certificate III in Forest Operations Qualification
BHL3 FWP30121 Certificate III in Forest Operations Qualification