Unit of competency Outline

Date retreived
23/07/2026 7:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Interpret designs to prepare timber wall frame drawings and documents using computers

Interpret designs to prepare timber wall frame drawings and documents using computers

Unit of competency
National Code
FWPTMM3206
State Code
AXJ68
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
040301 - Building Science And Technology
Original Release Date
05/10/2016
Nominal Hours
75
Description
This unit of competency describes the outcomes required to interpret designs and plans to produce a limited range of wall frame drawings and production documents using computers in a timber production or design setting.The unit applies to Designer, Timber Advisory Supervisor. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Interpret plans and designs
  • 1.1 Gather information about designs and plans, design factors and specifications.
  • 1.2 Access and interpret industry and organisational codes and standards to ensure production of compliant drawings and production documents.
  • 1.3 Identify stakeholders and consult where clarification is needed.
2. Create wall frame layouts
  • 2.1 Design wall frames to ensure compliance with identified standards.
  • 2.2 Check computer software for currency.
  • 2.3 Input applied loads and data to software and create wall frame layout.
  • 2.4 Refer design requirements for structural members outside software limitations to appropriate personnel for resolution.
3. Review wall frame layouts
  • 3.1 Identify available materials and other production efficiencies and amend designs.
  • 3.2 Review designs to ensure identified standards are maintained.
  • 3.3 Follow organisational procedures to refer design variations to relevant stakeholders where design varies from identified standards.
4. Create outputs
  • 4.1 Prepare drawings and documentation in line with identified standards.
  • 4.2 Store drawings and documentation and communicate to relevant stakeholders.
No information
No information
Replaces
State Code National Code Title Type
D3808 FPITMM3206A Interpret designs to prepare timber wall frame drawings and documents using computers Unit of competency
Replaced By
State Code National Code Title Type
OCR36 FWPTMM4211 Interpret details of timber wall frames to inform design of plans and production documents Unit of competency
State Code National Code Title Type
BAK6 FWP30916 Certificate III in Timber Truss and Frame Design and Manufacture Qualification