Unit of competency Outline

Date retreived
22/07/2026 9:24 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install a radio communications antenna and feedline

Install a radio communications antenna and feedline

Unit of competency
National Code
ICTRFN301
State Code
AWD98
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to install and test a communications antenna and feedline on a range of fixed or mobile structuresIt applies to individuals working as telecommunications and radio communications technicians who operate within cellular, radio broadband and digital TV reception applications. Installations may be new or existing, standalone or part of a site with multiple antennas. Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the ICT Implementation Guide Companion Volume or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Plan assembly of antenna system
  • 1.1 Arrange access to site according to required procedure
  • 1.2 Apply all relevant legislation, codes, regulations and standards in planning process
  • 1.3 Obtain relevant antenna specifications, requirements and radio communication site management book (RCSMB) from appropriate personnel
  • 1.4 Organise appropriate installation personnel to be available on site
  • 1.5 Assess relevant hazard levels from RCSMB and take appropriate preventative action according to prescribed safety requirements
  • 1.6 Identify other antennas at site location and notify those who may be affected by outages
  • 1.7 Inspect antenna system and feedline for physical damage before further work is performed
  • 1.8 Organise tools and equipment and ensure they are in safe working order and adjusted to manufacturer’s specifications
2. Assemble, mount and align antenna and prepare feedline
  • 2.1 Follow site specific safety requirements and enterprise work health and safety (WHS) processes and procedures
  • 2.2 Assemble antenna system in safe manner according to manufacturer’s instructions
  • 2.3 Mount antenna with correct azimuth and polarisation according to manufacturer’s instructions and work practices
  • 2.4 Install radome to antenna if provided
  • 2.5 Install lightning protection systems according to plans and specifications
  • 2.6 Align antenna in horizontal and vertical planes to maximise signal
3. Test antenna installation and document test results
  • 3.1 Conduct performance tests in safe manner according to manufacturer’s specifications and instructions
  • 3.2 Record, interpret and compare test results with manufacturer’s data or design specifications
  • 3.3 Confirm correct overall operation of antenna system
4. Complete administrative tasks and clean up site
  • 4.1 Complete and store appropriate records and test results according to enterprise policy
  • 4.2 Label radio frequency (RF) transmitter equipment and feedlines according to legislation
  • 4.3 Notify all affected by outage that normal operation can resume
  • 4.4 Clean, pack and store all tools and test equipment, and organise transport in suitable protective casing where appropriate
  • 4.5 Restore any changes made to worksite to client’s satisfaction and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3398 ICTRFN3055A Install a radio communications antenna and feedline Unit of competency