Unit of competency Outline

Date retreived
22/07/2026 9:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply finishing techniques to upholstered furniture

Apply finishing techniques to upholstered furniture

Unit of competency
National Code
MSFUP3008
State Code
WI674
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
24
Description
This unit of competency covers hand finishing upholstered furniture by the application of concealed and decorative finishing techniques.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Job requirement is identified from work order or other instructions, including any special requirements for finishing
  • 1.2 Required materials, upholstered components to be finished, and appropriate tools and equipment are identified from work order
  • 1.3 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.4 Items to be finished are assembled in an appropriate work area and inspected for appropriate quality
  • 1.5 Appropriate tools, equipment and finishing materials and hardware are selected
2 Apply finishing techniques
  • 2.1 Finishing techniques are applied in accordance with workplace procedures
  • 2.2 Problems are notified following workplace procedures
  • 2.3 Finished upholstered item is inspected against work requirement with unsatisfactory finish being redirected for re-working
3 Complete work
  • 3.1 Finished work is package/stored/tagged and despatched to the next process following workplace procedures
  • 3.2 Any required documentation is completed and processed following workplace procedures
  • 3.3 Tools and equipment used are cleaned, maintained as required and stored in accordance with workplace procedures
  • 3.4 Work area is cleaned with waste and scrap being removed/recycled in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8818 LMFUP3008B Apply finishing techniques to upholstered furniture Unit of competency
Replaced By
State Code National Code Title Type
OEM42 MSFUP3022 Apply finishing techniques to upholstered furniture Unit of competency
State Code National Code Title Type
J735 MSF30713 Certificate III in Upholstery Qualification