Test and service outdoor electric powered equipment

Unit of competency Outline

Date retreived
22/07/2026 11:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AURE222976B

State Code
D7586

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
21/06/2011

View on TGA

State Implementation and Classification

Approved Date

12/10/2011

Field of Education

030503 - Vehicle Mechanics

Original Release Date

12/10/2011

Nominal Hours

Description

This unit of competency describes the skills and knowledge required to carry out testing and servicing of outdoor electric powered equipment, including shears, blowers, shredders and mulchers.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Notes

Elements and Performance Criteria

1. Prepare for test

1.1. Confirm nature and scope of work requirements
1.2. Identify and source procedures, information and tooling required
1.3. Analyse method options, select those most appropriate to the circumstances and make preparations
1.4. Source technical and/or calibration requirements for testing and prepare support equipment

2. Conduct test and analyse results

2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
2.2. Observe warnings in relation to working with 240 V
2.3. Carry out load test in accordance with workplace procedures and manufacturer/component supplier specifications
2.4. Compare test results with specifications to indicate compliance or non-compliance
2.5. Document results with evidence and supporting information and make recommendations
2.6. Forward report to persons for action in accordance with workplace procedures

3. Prepare to service equipment

3.1. Confirm work to be carried out
3.2. Access and interpret service procedures, workshop manuals and manufacturer's information
3.3. Identify and prepare tools, equipment and materials required for servicing job
3.4. Set up work area

4. Carry out equipment service

4.1. Service equipment following manufacturer/component supplier recommended procedures and specifications
4.2. Make minor adjustments during the service in accordance with manufacturer/component supplier specifications
4.3. Replace electronic module, as required

5. Prepare equipment for delivery to customer

5.1. Complete service schedule documentation and update customer and warranty information, as required
5.2. Inspect serviced unit to ensure protective guards, cowlings and safety features are in place
5.3. Clean unit to workplace expectations
5.4. Clean work area, dispose of waste, and store tools and equipment in accordance with workplace procedures
5.5. Provide customer report on service and explain use and care of equipment and warranty requirements

No information

Replaces

State Code	National Code	Title	Type
W2861	AURE222976A	Test and service outdoor powered equipment	Unit of competency
W2860	AURE222876A	Test, service and repair powered shears	Unit of competency

Replaced By

State Code	National Code	Title	Type
WF307	AURPTR2002	Test and service outdoor electric powered equipment	Unit of competency

State Code	National Code	Title	Type
D542	AUR30711	Certificate III in Outdoor Power Equipment	Qualification