Unit of competency Outline

Date retreived
22/07/2026 9:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Supervise technical operations for gas distribution or transmission

Supervise technical operations for gas distribution or transmission

Unit of competency
National Code
UEGNSG110
State Code
OAD76
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/09/2018
View on TGA
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
080315 - Project Management
Original Release Date
04/01/2019
Nominal Hours
54
Description
This unit involves the skills and knowledge required to supervise technical operations for gas distribution or transmission project.It includes preparing, selecting and using relevant resources, including equipment, tools and personnel; identifying, solving and monitoring operational faults; and completing relevant documentation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to supervise operations
  • 1.1 Project activities are planned to prevent further damage and to ensure minimal disruption to gas supply
  • 1.2 Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant person/s in accordance with job requirements and workplace procedures
  • 1.3 Hazards are identified, work health and safety (WHS)/occupational health and safety (OHS) risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
  • 1.4 Job requirements and workplace procedures for work are obtained for all work sites and communicated to relevant person/s in accordance with workplace procedures
  • 1.5 WHS/OHS workplace procedures and environmental and sustainable energy policies and procedures related to the work are identified, obtained and applied
  • 1.6 Relevant work permit/s are obtained to coordinate and perform the work in accordance with workplace procedures, regulatory and job requirements and
  • 1.7 Person/s, equipment, tools and personal protective equipment (PPE) required for the job are identified, scheduled, coordinated and checked for correct operation and safety in accordance with workplace procedures
  • 1.8 Clients are provided with possible solutions and options within the scope, acceptable cost and project requirement parameters
  • 1.9 Communication issues with relevant stakeholders are resolved and project activities coordinated in accordance with work schedule and workplace procedures
  • 1.10 Person/s participating in the project work are briefed and responsibilities coordinated and authorised, as required, in accordance with workplace procedures
  • 1.11 Project expenditure is forecast, monitored and managed in accordance with operational budget constraints
2 Supervise operationsduring project
  • 2.1 WHS/OHS risk control measures are followed in accordance with workplace procedures
  • 2.2 Equipment and systems are inspected, tested and faults identified in accordance with work schedule, job requirements and workplace procedures
  • 2.3 Hazard warnings and safety signs are recognised, hazards and WHS/OHS risks assessed and reported to authorised person/s for directions in accordance with workplace procedures
  • 2.4 Fault finding and troubleshooting techniques are applied to identify repairs or maintenance required in accordance with project job requirements and workplace procedures
  • 2.5 Project work is supervised to ensure completion in agreed timeframe and to industry standards with a minimum of waste in accordance with job requirements and workplace procedures
  • 2.6 Unplanned situations are responded to in accordance with workplace procedures, in a manner that minimises risk to personnel and equipment
  • 2.7 Quality and safety checks of the work are undertaken in accordance with job requirements, workplace procedures and community and industry standards
  • 2.8 Relevant person/s are updated with project status/requirements in accordance with workplace procedures
3 Complete project work and relevant documentation
  • 3.1 Work undertaken is checked against project work schedule for conformance and anomalies and proposed solutions identified and reported to relevant person/s in accordance with workplace procedures
  • 3.2 Accidents and injuries are reported and followed up as required in accordance with workplace procedures
  • 3.3 Work site is rehabilitated/cleaned up and confirmed safe in accordance with workplace procedures
  • 3.4 Tools, equipment and surplus resources and materials are cleaned, checked and returned to storage in accordance with workplace procedures
  • 3.5 Relevant work permit/s are signed off in accordance with workplace procedures, job and regulatory requirements
  • 3.6 Project work completion records, reports, documentation and as installed/modified drawing/s are completed, processed and appropriate person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
S8139 UEGNSG110B Supervise technical operations for gas distribution or transmission Unit of competency
Replaced By
State Code National Code Title Type
OEK91 UEGNSG037 Supervise technical operations for gas distribution or transmission Unit of competency