Unit of competency Outline

Date retreived
22/07/2026 11:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Build solid stonemasonry walls

Build solid stonemasonry walls

Unit of competency
National Code
CPCCST3016
State Code
OCP44
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
30
Description
This unit specifies the skills and knowledge required to build stonemasonry solid walls. It includes installing damp proofing and flashing.This unit applies to stonemasons who work independently or in a team to build solid stonemasonry walls on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read, interpret and apply solid stonemasonry wall construction requirements from current plans, specifications, standards and codes.
  • 1.2 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.3 Use measurements and formulas to calculate material quantities.
  • 1.4 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.5 Identify potential hazards and determine and implement control measures.
  • 1.6 Select and check condition of plant, equipment and tools and report damage or malfunction to relevant person.
  • 1.7 Check conformity of materials against the specifications and place materials in proximity of the work.
2 Set out stonework.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Identify structural details, loadbearing stonework and piers for stonework construction.
  • 2.3 Establish finish heights and levels from datum and set out and mark base stonework.
  • 2.4 Set out stonework gauge and bond.
  • 2.5 Set out and mark load bearing stonework, damp proof course (DPC), flashing, ventilation, vermin proofing and ant capping.
  • 2.6 Set out door and window positions to suit gauge and bond.
3 Construct solid masonry walls.
  • 3.1 Mix mortar to colour and consistency of job requirements.
  • 3.2 Lay base stones and construct to set out position and to level and bond.
  • 3.3 Construct sold stonemasonry walls straight, level and plumb to allowable tolerances and with required wall ties.
  • 3.4 Install DPC, flashings, weep holes and ventilation to comply with standards and codes.
  • 3.5 Set out, erect, stabilise and brace work platform to workplace safety requirements.
  • 3.6 Construct window and door openings and install flashings.
  • 3.7 Install lintels and head flashings.
  • 3.8 Install roof tie down to meet specifications and standards.
  • 3.9 Set out, cut and lay sill bricks with specified slope and clearances.
4 Finish stonework.
  • 4.1 Remove excess mortar prior to drying.
  • 4.2 Rake or rule joints to specified profile and depth.
  • 4.3 Bruch down and clean face stonework.
5 Clean up.
  • 5.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 5.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 5.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
WI760 CPCCST3016A Build solid stonemasonry walls Unit of competency
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification