Unit of competency Outline

Date retreived
22/07/2026 9:14 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dismantle and re-assemble furniture

Dismantle and re-assemble furniture

Unit of competency
National Code
MSFFF2002
State Code
WI314
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040311 - Carpentry And Joinery
Original Release Date
19/06/2014
Nominal Hours
56
Description
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Work requirements are correctly identified from drawings, specifications and instructions
  • 1.2 Quality assurance requirements are recognised and adhered to in accordance with enterprise operation
  • 1.3 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.4 Tools, equipment and materials selected are consistent with job requirements and work instructions, checked for safety and serviceability, and any faults reported to supervisor
2 Dismantle furniture and/or fitting item
  • 2.1 Items to be dismantled are identified
  • 2.2 Items are dismantled to the extent required in the work instructions using appropriate tools and procedures
  • 2.3 Fasteners and attachments are removed, tagged and stored
  • 2.4 Component parts are separated, tagged and stored following workplace procedures
  • 2.5 Component parts are despatched to the next process according to workplace procedures
3 Re-assemble furniture and/or fitting item
  • 3.1 Items to be re-assembled are identified
  • 3.2 Items are re-assembled to the extent required in the work instructions using appropriate tools and procedures
  • 3.3 Fasteners and attachments selected and used according to workplace procedures
  • 3.4 Fasteners and attachments selected and used according to workplace procedures
  • 3.5 Assembled item is despatched to the next process according to workplace procedures
4 Clean work area maintain equipment and complete operations
  • 4.1 Equipment used is cleaned, inspected for serviceable condition and stored according to workplace procedures
  • 4.2 Equipment faults are identified, tagged and reported to appropriate personnel
  • 4.3 Work area is cleaned and returned to operational condition
No information
No information
Replaces
State Code National Code Title Type
W8507 LMFFF2002B Dismantle/re-assemble furniture Unit of competency
Replaced By
State Code National Code Title Type
OEL89 MSFFF2010 Dismantle and reassemble furniture for finishing Unit of competency
State Code National Code Title Type
J726 MSF20213 Certificate II in Furniture Finishing Qualification
J729 MSF30113 Certificate III in Furniture Finishing Qualification