Unit of competency Outline

Date retreived
22/07/2026 5:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate roof coverings for curved structures

Fabricate roof coverings for curved structures

Unit of competency
National Code
CPCPRF2024
State Code
OCN03
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
23/12/2020
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to design and fabricate curved industrial roof coverings.It covers drawing fabrication patterns based on sketches of roof coverings, calculating curve dimensions and selecting roofing materials for new or existing, domestic or commercial structures.The unit is suitable for people with basic skills and knowledge who undertake routine work tasks under the direction of more experienced workers.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Determine requirements roof coverings to be designed and fabricated based on plans and specifications.
  • 1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements and sustainability principles associated with fabricating roof coverings for curved structures.
  • 1.3 Consult with relevant personnel to plan and sequence tasks.
  • 1.4 Prepare work area to support efficient fabrication of roof coverings.
2 Identify installation requirements.
  • 2.1 Select roofing material that is suitable for the fabrication process, job requirements and relevant information.
  • 2.2 Ascertain curvature of roof covering and use to determine the starting and finishing points of curves.
  • 2.3 Create design and freehand sketch of the roof covering to form the basis of fabrication patterns.
  • 2.4 Draw fabrication patterns based on design and freehand sketch of roof covering.
3 Fabricate covering.
  • 3.1 Determine material list from patterns and calculations.
  • 3.2 Determine method of fabrication, tools and machinery for fabrication to suit job requirements.
  • 3.3 Select and check the serviceability of the appropriate tools, equipment and PPE reporting any faults according to workplace procedures.
  • 3.4 Mark out and fabricate roof covering according to drawings, patterns or calculations.
  • 3.5 Access information to complete documentation according to workplace procedures and submit within specified timeframes.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
  • 4.2 Clean tools and equipment, check for serviceability reporting any damage, store and secure.
No information
No information
Replaces
State Code National Code Title Type
WF949 CPCPRF2024A Fabricate roof coverings for curved structures Unit of competency
State Code National Code Title Type
BGC2 CPC32420 Certificate III in Plumbing Qualification
BGD0 CPC32620 Certificate III in Roof Plumbing Qualification