Unit of competency Outline

Date retreived
23/07/2026 4:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and service 240 volt portable generators

Test and service 240 volt portable generators

Unit of competency
National Code
AURPTR101
State Code
OCL53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
31/03/2021
Nominal Hours
10
Description
This unit describes the skills and knowledge required to test and service 240 volt portable generators according to manufacturer specifications. The unit involves preparing for the task, testing and servicing the equipment, performing post-service testing, and completing workplace processes and documentation.The unit applies to those working in the outdoor power equipment service and repair industry. The portable generators may be driven by petrol or diesel engines. Testing and servicing relate only to the 240 volt generator, and not the engine driving the generator.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to undertake load test of portable generator
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Source and interpret workplace inspection and service procedures
  • 1.3 Identify and manage hazards associated with the tasks
  • 1.4 Select tools and equipment and check for serviceability
2. Conduct test and interpret results
  • 2.1 Inspect and test system according to manufacturer specifications, workplace procedures, and safety requirements
  • 2.2 Compare test results with manufacturer specifications to determine service requirements
  • 2.3 Obtain authorisation to proceed according to workplace procedures
3. Prepare to service generator
  • 3.1 Analyse service options and select those most appropriate based on the circumstances
  • 3.2 Check and select tools, equipment and materials for serviceability
4. Service generator
  • 4.1 Service components, and adjust and replace as required according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
  • 4.2 Run generator and perform resistive load test and compare with manufacturer specifications
5. Complete work processes
  • 5.1 Conduct final inspection according to workplace procedures and confirm equipment is ready for use
  • 5.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 5.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXB68 AURPTR001 Test and service 240 volt portable generators Unit of competency