Unit of competency Outline

Date retreived
22/07/2026 10:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare, load and unload reels and cores on and off machine

Prepare, load and unload reels and cores on and off machine

Unit of competency
National Code
ICPSUP201
State Code
AUN55
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to load and unload reels and cores on and off machines. It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry, and use limited practical skills and fundamental knowledge in a defined context. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare reels and cores
  • 1.1 Faulty material is visually identified and removed according to enterprise procedures
  • 1.2 Substrate is positioned in correct unwind direction
  • 1.3 Substrate is spliced/joined according to job requirements
  • 1.4 Reel cores are selected or prepared to meet work health and safety (WHS) requirements and job specifications
2. Load reels and cores onto machine
  • 2.1 Reels are loaded according to WHS requirements and manufacturer’s and enterprise procedures and specifications
  • 2.2 Reel cores are loaded to meet job specifications
  • 2.3 Area around machine is cleaned during and on completion of loading
3. Unload reels off machine
  • 3.1 Reels are unloaded according to WHS requirements and manufacturer’s and enterprise procedures and specifications
  • 3.2 Reels are prepared (stripped, stacked, wrapped, labelled) for next process according to manufacturer’s and enterprise procedures and specifications
  • 3.3 Reels are stored according to manufacturer’s and enterprise procedures and specifications
No information
No information
Replaces
State Code National Code Title Type
D3240 ICPSU201C Prepare, load and unload reels and cores on and off machine Unit of competency
Replaced By
State Code National Code Title Type
OBQ63 ICPSUP2010 Prepare, load and unload reels and cores on and off machine Unit of competency