Install milking equipment

Unit of competency Outline

Date retreived
23/07/2026 11:04 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AHCMKH404

State Code
BAS02

TGA Status
Deleted

DTWD Status
Transition (Deleted)

Current Release Number
1.00

Current Release Date
27/06/2016

View on TGA

State Implementation and Classification

Approved Date

12/01/2017

Field of Education

030717 - Plant And Machine Operations

Original Release Date

12/01/2017

Nominal Hours

Description

This unit of competency describes the skills and knowledge required to install milking equipment.All work must be carried out to comply with workplace procedures, work health and safety, animal welfare and biosecurity legislation and codes, and sustainability practices.This unit applies to individuals who take responsibility for their own work and provide and communicate solutions to a range of predictable and sometimes unpredictable problems.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1. Order installation components

1.1 Complete contract for work with customer
1.2 Order specified tinware as per planned installation
1.3 Ensure bending and rolling of pipe work meet specifications
1.4 Assemble components in transportable sections for transfer to site
1.5 Seek specialist advice for non-standard installations

2. Inspect and prepare installation site

2.1 Check site location, dimensions and levels
2.2 Determine work health and safety hazards, assess risks, implement controls and complete records
2.3 Report non-compliance and make alterations and corrections in consultation with the appropriate authorities
2.4 Measure installation and mark layout as per contract plans

3. Manufacture components in the workshop

3.1 Ensure vacuum pump guards and stands are made according to specifications
3.2 Ensure pipelines and vessels are manufactured and assembled according to installation design
3.3 Pre-wire electrical components
3.4 Complete non-milking systems as per dairy plan
3.5 Determine work health and safety hazards, assess risks and implement safe systems of manufacture

4. Install machine/equipment

4.1 Prepare machine/equipment components for sequential installation
4.2 Install machine/ equipment as per specifications and in co-operation with the enterprise and trade and building personnel
4.3 Carry out all work as per regulatory requirements and in compliance with the Australian Standards for Milking Equipment Installation and Performance
4.4 Determine work health and safety hazards, assess risks and implement safe systems of installation
4.5 Make modifications to standard operating procedures as required
4.6 Level, align, couple and connect machine/ equipment as per specifications, excluding electrical components

5. Commission test installed machine/equipment

5.1 Complete mechanical testing of machine/ equipment to ensure conformance to specifications, performance standards and other requirements such as work health and safety
5.2 Take corrective actions for machine/equipment performing below standards and manufacturer's specifications
5.3 Ensure final work quality and finish comply with established industry standards
5.4 Clean site, remove all leftover materials and waste, and ensure that site is safe
5.5 Record and report all alterations/modifications to machine/equipment to the appropriate authority

No information

Replaces

State Code	National Code	Title	Type
D7052	AHCMKH404A	Install milking equipment	Unit of competency

State Code	National Code	Title	Type
BDF2	AHC40116	Certificate IV in Agriculture	Qualification