Unit of competency Outline

Date retreived
24/07/2026 2:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex converted or finished product

Produce complex converted or finished product

Unit of competency
National Code
ICPCBF320
State Code
AUM60
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to cover complex die cutting, embossing, folding, collating or fastening.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain delivery systems
  • 1.1 Delivery systems are monitored and adjusted to ensure continuous and efficient operation and avoid damage to finished product
  • 1.2 Substrate is added and removed to and from the process according to job specifications
2. Maintain cutting system
  • 2.1 Knife or die condition is monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.2 Cutting pressures are monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.3 Registration of cutting devices and knives or dies are monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.4 Packing of cutting devices or dies is monitored and adjusted to ensure product quality meets the approved sample standard
3. Maintain complex process
  • 3.1 Registration and squareness of folds are monitored and adjusted to ensure product quality meets the approved sample standard, if relevant
  • 3.2 Collating/inserting process is monitored and adjusted to ensure product quality meets the approved sample standard, if relevant
4. Maintain production process
  • 4.1 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 4.2 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 4.3 Manual and/or automatic control is used according to job specifications
  • 4.4 Performance is monitored and verified using the process control system according to enterprise procedures
  • 4.5 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 4.6 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 4.7 Faulty performance of equipment is identified and reported according to enterprise procedures
  • 4.8 Waste is sorted according to enterprise procedures
5. Identify and rectify problems or faults
  • 5.1 Product and substrate are monitored and tested to ensure conformance to client requirements
  • 5.2 Problems in converting/finishing machine operation are identified and reported according to enterprise procedures
  • 5.3 Adjustments or corrections are carried out according to specified procedures and manufacturer’s specifications
  • 5.4 Converting/finishing machine operation is checked to ensure correct operation
6. Conduct shutdown of production process
  • 6.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • 6.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements
  • 6.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 6.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • 6.5 Repair/adjustment is verified prior to resumption of operations
7. Clean converting/finishing machine at end of run
  • 7.1 Cutting devices and knives or dies are cleaned or replaced ready for next run
  • 7.2 Cutting devices are sharpened according to WHS procedures
  • 7.3 All units are disengaged and cleaned ready for next run
  • 7.4 Delivery systems are disengaged and cleaned ready for next run
  • 7.5 Production records or other documentation are accurately completed where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3052 ICPCF320C Produce complex converted or finished product Unit of competency
Replaced By
State Code National Code Title Type
OBP50 ICPCBF3200 Produce complex converted or finished product Unit of competency