Unit of competency Outline

Date retreived
23/07/2026 12:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install fire detection and warning system apparatus

Install fire detection and warning system apparatus

Unit of competency
National Code
UEEEC0041
State Code
OCB83
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to install fire detection and warning system apparatus.It includes installing electronic fire detection and warning systems in buildings and premises. It also includes working safely and to industry standards, following oral and written instructions and workplace procedures, and securely placing and connecting fire detection system and warning components.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to assemble fire detection and warning apparatus
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
  • 1.2 WHS/OHS risk control measures are followed in preparation for work
  • 1.3 Safety hazards that have not previously been identified are reported and advice on risk control measures sought from the work supervisor
  • 1.4 Nature and location of the work is obtained from work supervisor or appropriate person/s to determine the scope of work to be undertaken
  • 1.5 Advice is sought from work supervisor or other relevant person/s to ensure the work is coordinated effectively with others
  • 1.6 Sources of materials required for work activities are determined in accordance with workplace procedures
  • 1.7 Tools, equipment and testing devices needed to carry out work activities are obtained and checked for correct operation and safety
2 Assemble and set up fire detection and warning system
  • 2.1 WHS/OHS risk control measures for carrying out the work are followed
  • 2.2 Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Fire protection controller and detection and warning devices are located for optimum performance in accordance with customer requirements, industry standards and regulations
  • 2.4 Accessories are installed straight and square in the required locations and within acceptable tolerances
  • 2.5 Cables and conductors are terminated at accessories in accordance with manufacturer specifications and regulatory requirements
  • 2.6 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.7 Fire protection installation is carried out efficiently without waste of materials or damage to apparatus, circuits or the surrounding environment using sustainable energy practices
3 Complete fire detection and warning system apparatus installation
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Worksite is cleaned and made safe in accordance with established procedures
  • 3.3 Fire protection system is documented in accordance with regulatory requirements and workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC587 UEENEEH161A Install fire detection and warning system apparatus Unit of competency