Unit of competency Outline
Date retreived
23/07/2026 6:19 PM AWST
23/07/2026 6:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Prepare drawings for fabricated sheet metal products
Prepare drawings for fabricated sheet metal products
Unit of competency
National Code
MEM09219
MEM09219
State Code
OEU43
OEU43
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
40
Description
This unit of competency defines the skills and knowledge required to prepare detail drawings for fabricated sheet metal products to Australian Standard (AS) 1100.101 Technical drawing - General principles and is primarily for draftspersons operating within the manufacturing and engineering industry.Critical dimensions and specifications are predetermined and drawings are created with or without the use of computer-aided design (CAD) systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Access and interpret specifications
- 1.1 Follow standard operating procedures (SOPs) and comply with work health and safety (WHS) requirements at all times
- 1.2 Identify design process for fabricated sheet metal products
- 1.3 Interpret specifications and requirements for product and determine implications and requirements for fabrication
- 1.4 Access and interpret organisational and industry standards, information and catalogues to obtain required product specifications
2. Identify fabrication techniques
- 2.1 Identify features of sheet metal products and techniques used in fabrication
- 2.2 Identify characteristics of metal materials used in fabricated products and implications for fabrication techniques
- 2.3 Identify terminology, symbols and standards used in drawings for fabricated products and required inclusions for fabrication drawings
3. Prepare detail drawing
- 3.1 Perform calculations required to complete drawings to specifications
- 3.2 Lay out the drawing in accordance with specifications and industry conventions
- 3.3 Ensure drawing accurately reflects specifications, is presented according to organisational requirements and contains all relevant information, including full notation and dimensioning
4. Document and store drawings
- 4.1 Document drawings and associated technical information in accordance with project requirements and SOPs
- 4.2 Store drawings in accordance with SOPs
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE074 | MEM09219A | Prepare drawings for fabricated sheet metal products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BIW7 | MEM50222 | Diploma of Engineering - Technical | Qualification |
| BIW9 | MEM40422 | Certificate IV in Engineering Drafting | Qualification |