Unit of competency Outline

Date retreived
23/07/2026 4:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform hand engraving

Perform hand engraving

Unit of competency
National Code
MEM19014
State Code
OAU17
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
24/01/2020
Nominal Hours
36
Description
This unit of competency covers the skills and knowledge required for performing basic hand engraving using hand tool applications. Work includes block and script lettering and carving techniques on mostly flat surfaces to achieve patterns in relief or intaglio.Where the work being performed requires the item to have shaping/drilling/contour modification using power tools unit MEM18002 Use power tools/hand held operations should also be selected. No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Select and maintain engraving equipment and accessories
  • 2.1 Identify sequence of procedures and select appropriate equipment
  • 2.2 Prepare gravers to industry standards
3 Perform hand engraving
  • 3.1 Measure item and mark out for engraving
  • 3.2 Position work piece and hold or clamp effectively and without damage to the work piece
  • 3.3 Undertake work according to SOPs and industry standards
No information
No information
Replaces
State Code National Code Title Type
W5640 MEM19014B Perform hand engraving Unit of competency