Unit of competency Outline

Date retreived
22/07/2026 11:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect trees for access and work

Inspect trees for access and work

Unit of competency
National Code
AHCARB315
State Code
OBV56
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/08/2020
View on TGA
State Implementation and Classification
Approved Date
13/11/2020
Field of Education
050301 - Horticulture
Original Release Date
13/11/2020
Nominal Hours
70
Description
This unit of competency describes the skills and knowledge required to inspect a tree from the ground for the selection of access and tree work methods, and advise client of outcome.The unit applies to individuals who work in arboriculture under broad direction and take responsibility for their own work. They use discretion and judgement in the selection, allocation and use of available resources and for solving problems. The arboriculture industry requires that all tree inspection work is undertaken according to preferred industry practices (as outlined in the Companion Volume).No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare tree inspection requirements
  • 1.1 Confirm access to site and location of tree
  • 1.2 Determine the scope of tree works required in consultation with client
  • 1.3 Undertake a site-specific job safety analysis and record and implement site-specific control measures according to workplace safety procedures
  • 1.4 Identify above and below ground services and determine limits of approach
  • 1.5 Confirm accessibility of first aid and emergency personnel, equipment and procedures
  • 1.6 Select, check and use personal protective equipment
2. Inspect tree and surrounds
  • 2.1 Inspect tree for access and tree work methods
  • 2.2 Identify tree species and assess impact of tree characteristics on selection of access and work method
  • 2.3 Conduct a hazard evaluation of the tree and surrounds
  • 2.4 Conduct tests on tree components to determine integrity when visual inspection is insufficient
  • 2.5 Identify and assess presence of fauna habitat and other ecological impediments to tree access
3. Determine method of access and work method
  • 3.1 Select tree access and tree work methods according to tree inspection results
  • 3.2 Review workplace health and safety hazards, risk assessment and planned controls for selected method of access and tree work method
  • 3.3 Implement additional control measures and adjust tree access and work methods according to site requirements
  • 3.4 Advise site work team of identified hazards and control measures to implement
4. Maintain records and advise stakeholders
  • 4.1 Document control measures, tree access and work method according to workplace procedures
  • 4.2 Advise stakeholders where tree work is altered or rescheduled according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAT49 AHCARB302 Inspect trees for access and work Unit of competency