Unit of competency Outline

Date retreived
23/07/2026 7:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fix aerial cable

Fix aerial cable

Unit of competency
National Code
ICTCBL214
State Code
AWE87
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes skills and knowledge required to install aerial cables in client and access networks. It involves installing, terminating and securing cables. Aerial cable installation may be for a new cable, a cable upgrade or a cable in need of repair.It applies to individuals working as telecommunications linesmen and line installers who use support anchors and catenaries for new installations and upgrades, or to maintain existing networks in domestic, commercial and industrial installations to deliver services in x-digital subscriber line (xDSL), fibre to the home (FTTH) and hybrid fibre coaxial (HFC) networks.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the ICT Implementation Guide Companion Volume or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Prepare for aerial cable installation
  • 1.1 Obtain construction plan from appropriate personnel to scope work and arrange for site access
  • 1.2 Notify appropriate personnel of identified safety hazards at cabling worksite
  • 1.3 Determine cable route and type of cable from construction plan, identifying and avoiding other services
  • 1.4 Obtain plant, tools, safety equipment and material to perform tasks safely and efficiently
2. Install aerial cable
  • 2.1 Use tools according to enterprise guidelines and work health and safety (WHS) regulations
  • 2.2 Install catenary wire, gantry wire or integral bearer cable (IBC) and tension to required specifications
  • 2.3 Install cable according to current Australian Standards andenterprise guidelines, ensuring that no damage is caused and that physical characteristics of cable are maintained
  • 2.4 Secure cable permanently to support structure using aerial fixing devices according to manufacturer’s and enterprise guidelines
  • 2.5 Number cables on towers according to enterprise guidelines
3. Terminate, seal and secure aerial cable
  • 3.1 Terminate and seal cables according to manufacturer’s specifications
  • 3.2 Joint cable in suitable closures using enterprise guidelines
  • 3.3 Loop and secure cable on support structure with bending radius tolerance for cable materials to reduce damage to conductors
  • 3.4 Test cable for continuity and rectify fault if required
  • 3.5 Record test results for future reference
4. Complete project
  • 4.1 Complete reports on installation and design amendments and file according to enterprise requirements
  • 4.2 Recover obsolete materials and equipment and return to appropriate point for disposal
  • 4.3 Restore siteaccording to requirements of enterprise or approving authority and to client satisfaction
  • 4.4 Notify appropriate personnel of job completion and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3311 ICTCBL2134A Fix aerial cable Unit of competency
Replaced By
State Code National Code Title Type
OBA75 ICTCBL250 Haul and fix aerial cable Unit of competency