Unit of competency Outline

Date retreived
22/07/2026 10:50 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Complete penetrations and flashings

Complete penetrations and flashings

Unit of competency
National Code
CPCCWC2001
State Code
OCP22
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
8
Description
This unit specifies the skills and knowledge required to complete the penetrations and flashings associated with wall and ceiling lining, meeting all relevant requirements of Australian Standards, work health and safety (WHS) requirements, and Commonwealth and state or territory legislation. It does not cover the technical aspects of passive fire systems.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Select and use personal protective equipment (PPE) as required for each stage of the task.
  • 1.3 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.4 Follow requirements of job safety analyses and safety data sheets.
  • 1.5 Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Select tools and equipment, check for serviceability and report any faults.
2 Confirm penetration and flashing requirements.
  • 2.1 Select type of penetration and flashing to match host materials and meet work instructions.
  • 2.2 Identify, set out and check penetration location in accordance with workplace requirements.
3 Complete penetration and flashing.
  • 3.1 Create penetration safely and with minimal modification or damage to host materials.
  • 3.2 Install flashing safely and with minimal modification or damage to host materials.
  • 3.3 Install and connect casings, housings or other terminating points in accordance with workplace and regulatory requirements.
  • 3.4 Apply sealant or caulking compound to restore integrity of wall or ceiling system in accordance with manufacturers’ recommendations.
  • 3.5 Prepare surfaces for finishing.
4 Clean up.
  • 4.1 Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations.
No information
No information
Replaces
State Code National Code Title Type
W9603 CPCCWC2001A Complete penetrations and flashings Unit of competency
State Code National Code Title Type
BGC2 CPC32420 Certificate III in Plumbing Qualification
BGD5 CPC31220 Certificate III in Wall and Ceiling Lining Qualification