Unit of competency Outline
Date retreived
23/07/2026 5:57 PM AWST
23/07/2026 5:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fabricate aircraft electrical looms and harnesses
Fabricate aircraft electrical looms and harnesses
Unit of competency
National Code
MEAAVI0034
MEAAVI0034
State Code
OEG72
OEG72
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to apply hand skills and use maintenance publications to fabricate aircraft electrical looms and harnesses for general use in electrical systems in aircraft hangars and workshops under the guidance of qualified persons during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.Components or parts not covered in this unit include data bus cables, co-axial cables, fibre optic cables, fire detection/extinguishing systems, oxygen systems, fuel tanks and integrated hardware.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to fabricate aircraft electrical looms and harnesses
- 1.1 Select and prepare materials, tools and equipment for the particular task with guidance from qualified person in accordance with maintenance documentation and standard enterprise procedures
- 1.2 Align required assembly or fabrication jigs to ensure accurate component fabrication
2. Fabricate aircraft electrical looms and harnesses
- 2.1 Fabricate components or parts with guidance from qualified person to meet industry standards and in accordance with maintenance documentation and standard enterprise procedures while observing all relevant work health and safety (WHS) requirements
3. Perform routine tests on aircraft electrical looms and harnesses
- 3.1 Use required test equipment and/or rigs with guidance from qualified person to confirm serviceability of finished components
- 3.2 Tag, seal and package fabricated components in accordance with specified procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUG01 | MEA239 | Fabricate aircraft electrical looms and harnesses | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDV9 | MEA20418 | Certificate II in Aeroskills | Qualification |