Module Outline
Date retreived
23/07/2026 7:34 AM AWST
23/07/2026 7:34 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fitting and Machining App 1b
Fitting and Machining App 1b
Module
National Code
State Code
85372
85372
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
136
Description
To provide workshop practice, and the
related theory, that will allow
apprentices to develop basic skills on
the bench, lathe, surface-grinder and
marking-out table.
To develop safe practices in the
workshop.
To provide the apprentice with theory and practice, on the topics of
lubrication, lifting, torque, limits and fits, fasteners and precision
measurement.
related theory, that will allow
apprentices to develop basic skills on
the bench, lathe, surface-grinder and
marking-out table.
To develop safe practices in the
workshop.
To provide the apprentice with theory and practice, on the topics of
lubrication, lifting, torque, limits and fits, fasteners and precision
measurement.
No information
Evidence Guide
Examination 50% Internal Drawing Assessment 50%
Internal Practical Assessment 100%
Trade Theory - Written paper, one
hour 50 marks
Trade Drawing - Assessment of two
lecturer-marked tests. The two tests
are set down in the Fitting and
Machining Drawing worksheets. 50
marks
Practice - Practical Objectives are designated by a "p", and are assessed in a
series of practical tests, specified in Stage 1 Block B Practical workbook.
Trade Technology Mark = Trade Theory
Mark + Trade Drawing Mark
Practical Mark = The percentage of
Practical Objectives achieved.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination may be
granted on the recommendation of a
Board of Review, when the practice
assessment is satisfactory.
Internal Practical Assessment 100%
Trade Theory - Written paper, one
hour 50 marks
Trade Drawing - Assessment of two
lecturer-marked tests. The two tests
are set down in the Fitting and
Machining Drawing worksheets. 50
marks
Practice - Practical Objectives are designated by a "p", and are assessed in a
series of practical tests, specified in Stage 1 Block B Practical workbook.
Trade Technology Mark = Trade Theory
Mark + Trade Drawing Mark
Practical Mark = The percentage of
Practical Objectives achieved.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination may be
granted on the recommendation of a
Board of Review, when the practice
assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2800 | First Class Machining | Accredited course | |
| 3052 | Fitting and Machining | Accredited course | |
| 2840 | Fitting and Machining | Accredited course | |
| 2841 | Certificate III in Locksmithing | Accredited course | |
| 2912 | Mechanical Fitting | Accredited course | |
| 3076 | Plant Mechanic.fitting and Machining | Accredited course |